Changing Engine Oil, Oil Filter, And Fuel Filter (Subaru-Powered Units) - Miller Bobcat 225 Owner's Manual

8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Subaru-Powered Units)

Oil Check
Full
3
4
Tools Needed:
.
Oil Fill
1
A complete Parts List is available at www.MillerWelds.com
!
Stop engine and let cool.
1 Oil Drain Valve
2 Oil Filter
Change engine oil and filter accord-
ing to engine owner's manual.
NOTICE − Close valve and valve
cap before adding oil and running
engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 5-4).
3 Fuel Filter
4 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
!
Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
Reset oil maintenance countdown
by flipping Engine Control switch
from Run/Idle to Run three times.
2
803 755 / 240 947-A / S-0842
OM-4434 Page 43