Installing Hardware Inside The Zotac Zbox; Installing A Memory Module - Zotac Zbox User Manual

Installing Hardware inside the ZOTAC ZBOX

Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX.
1. Unscrew the 2 thumb screws
2. Gently slide the cover off as shown below.

Installing a memory module

1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module
into the slot at a 45 degree angle.
Note: When installing two SO-DIMM memory modules, please insert a module into the lower slot first.
ZOTAC ZBOX
9