10. DC Electrical Characteristics and Operating Conditions
£
£
×
(0°C
T
70
C; V
A
DDQ
11. AC Characteristics
1. All voltages referenced to VSS.
2. Tests for AC timing, IDD, and electrical, AC and DC characteristics, may be
conducted at nominal reference/supply voltage levels, but the related specifications
and device operation are guaranteed for the full voltage range specified.
3. Outputs measured with equivalent load. Refer to the AC Output Load Circuit below.
4. AC timing and IDD tests may use a VIL to VIH swing of up to 1.5V in the test
environment, but input timing is still referenced to VREF (or to the crossing point for
CK, CK), and parameter specifications are guaranteed for the specified AC input
levels under normal use conditions. The minimum slew rate for the input signals is
1V/ns in the range between VIL(AC) and VIH(AC).
CONFIDENTIAL – DO NOT COPY
±
+
= 2.5V
0.2V, V
=
2.5V
DD
±
0.2V, see AC Characteristics)
Page 7-40
File No. SG-0211