Panasonic UF-9000 Service Handbook page 84

No. Parameter
117~ Not Used
121
122 LDAP
123 ~ Not Used
199
Note 1: Continuous Polling (Station Mode)
This feature allows you to store or add documents into a polled file in memory.
To enable the Continuous Polling feature set Function Parameter No. 003 to "2:Station".
The last Program Key will be assigned with the "Store 4 Poll" Key name automatically
and cannot be changed.
To prepare the document(s) to be polled, simply place the document(s) on the ADF or Platen
and then press the Program Key to store or add the document(s) into a polled file.
(Note: If a regular polled file is stored in memory, the Program Key for Continuous Polling will
not be accepted.)
Note 2: Function Parameter No. 070 (Line Error)-Transmit condition of RTP/PIP or RTN/PIN
Signal
MCF/PIP
RTP/PIP
RTN/PIN
Note 3: Function Parameter No. 071 (Total Error)-Transmit condition of RTP/PIP or RTN/PIN
Note 4: The default setting of parameters depends on the country's specifications or regulations. Print the
Function Parameter List to confirm the default settings.
Ver. 2.0
Function Parameter Table
Selections
1 = Off
2 = On
1:128 2:256
0-31 0-63
32-63 64-127
64-127 128-255
Signal
1:5%
MCF/PIP 0-2
RTP/PIP 3-4
RTN/PIN 5-
When LDAP is used, specialized characters may be
displayed as different characters.
Setting
3:512 4:1024
0-127 0-255
128-255 256-511
256-511 512-1023
Setting
2:10% 3:15%
0-4 0-7
5-9 8-14
10- 15-
84
Function
5:2048 6:Off
0-511 Always
512-1023 -
1024-2047 -
4:20%
0-9
10-19
20-
UF-9000
DP-180/190
JUN 2004