Table of Contents
Advertisement
Available languages
Available languages
1.
Brake master cylinder
2.
Brake hose holder
3.
Brake hose
A.
Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the brake caliper.
B.
Pass the brake hose into the
brake hose holders.
C.
If the brake hose contacts the
spring (rear shock absorber),
correct its twist.
D.
Install the brake hose so that its
pipe portion directs as shown
and lightly touches the projec-
tion on the brake master cylin-
der.
2-23
CABLE ROUTING DIAGRAM
Advertisement
Table of Contents
