Print Delivery - Brother HL-820 Service Manual

2.4 Paper Loading
(1) Multi-purpose sheet feeder loading
Paper size: A4, Letter, Legal, B5, A5, A6, and Executive. Other sizes of media that
can be handled by the feed mechanism can be loaded.
Feedable paper weight: 60 (16lb.) to 158 (42lb.) g/m
Maximum load height :
Setting method:
(2) Manual slot loading
Paper size:
Feedable paper weight: Same as in (1) for the multi-purpose sheet feeder.
Setting methods:
Cautions:


Before loading paper with holes such as organizer sheets, be sure to fan the stack
well.


When printing on the back of pre-printed paper, be sure to straighten the paper as
much as possible.
2.5

Print Delivery

(1) With the output tray opened
Tray capacity: Maximum 100 sheets (80g/m
(2) With the output tray closed
Tray capacity: 1 sheet (80g/m
Note:


Face down:


Environment :
69.8 to 229 mm
Feeding direction
22mm (200 sheets of 80g/m
Pull the MP sheet feeder cover toward you, insert the
stack of paper into the feeder, aligning the top edge of
the sheets, then push the cover back to its original
position.
Same as in (1) for the multi-purpose sheet feeder.
Place the side of the paper to be printed on face down
into the manual feed slot after selecting orientation. Align
the paper at the center of the manual feed slot, and be
sure to insert it fully into the feed slot. Move the paper
guide of the manual feed slot to the paper width.
2 ), face-down only
Deliver the printed face of the paper downward.
23°C
I-5
105 to 356mm (face down)
2
paper) letter or A4 size
2
2 ), face-down only