Language; Video-3 Setting; Teletext Language - JVC LT-26AX5/S Service Manual

LANGUAGE

The LANGUAGE setting which was
performed in the "Initial settings" (page 8)
can be changed.
1 Choose LANGUAGE, then press
the a or 3 button
A sub-menu of the LANGUAGE function
appears.
LANGUAGE
D1002-EN
2 Press the 6 buttons to choose a
language. Then press the a
button

VIDEO-3 SETTING

Set the VIDEO-3 SETTING correctly
according to the video signal input from the
external device connected to the VIDEO-3
terminal. If this setting is incorrect, images
will not be displayed.
VIDEO:
If a normal video signal (composite video
signal) is input.
S-VIDEO:
If a S-VIDEO signal (Y/C signal) is input.
• If you set S-VIDEO in VIDEO-3
SETTING, the display on the screen
changes from V3 to S3.

TELETEXT LANGUAGE

There are four types of teletext language
groups. Set the teletext language group that
corresponds to the language of the teletext
programme that you want to watch.
1 Choose TELETEXT LANGUAGE,
then press the a or 3 button
> TELETEXT LANGUAGE
GROUP-1
GROUP-2
GROUP-3
GROUP-4
OK
D1003 -EN
2 Press the 6 buttons to choose a
group
Group Languages
GROUP-1 Turkish, Hungarian, English,
German, French, Italian, Spanish,
Portuguese, Greek, Swedish,
Finnish
GROUP-2 Polish, Serbian, Croatian,
Slovenian, Czech, Slovak,
Rumanian, Hungarian, German,
French, Italian, Swedish, Finnish
GROUP-3 Russian, Bulgarian, Lettish,
Lithuanian, Estonian, Ukrainian,
Serbian, Croatian, Slovenian,
Czech, Slovak, English, German
GROUP-4 Arabic, Czech, Slovak. Hungarian,
English, German, French, Italian,
Spanish, Portuguese, Swedish,
Finnish
3 Press the a button to complete
the setting
The menu disappears.
• Languages that are not included in the
teletext language group that you select,
the sub-titles of the teletext programme
will not be displayed properly.
SET UP menu
33