Philips HD7810 Service Manual page 2

DISASSEMBLY- AND RE-ASSEMBLY ADVISE
Disassembly information
To remove the brew chamber lid cover handle as follows:
- Place the screwdriver on the
positions (see picture 1) and
lift the cover over the snap
locks on both positions.
- The cover lid can now be lifted
up a little and to remove the
complete cover including lever
and push rod squeeze strongly
with two fingers both legs of
the push rod (see picture 2)
to each other, so that the two
pins will get out of the hinge
position on the brew chamber.
- To remove lever from lid cover, take a screwdriver and bend
carefully the two lips/ribs in the lid cover outwards and
push the lever with force out of the hinge.
- Reassemble follow steps backwards, without using a
screwdriver.
To remove the back cover handle as follows:
- Remove valve outlet.
- Start at the upper side of the back cover and stick a
screwdriver into the 2 snap locks positions and gently pull
the back cover from the appliance so that a little chink
between back cover and brew chamber becomes visible.
- Put the screwdriver in to the 4 rectangular holes (snap
locks) at the back and gently pull the screwdriver such away
that the lips of the snap locks are bent outwards.
- If all clicks positions are loose, it is possible to remove the
back cover.
- Reassemble follow steps backwards.
Removing Brew chamber head handle as follows:
- Disassemble back cover!
- Place the appliance such a way that you are looking at the
- First remove the boiler from the snap lock position of the
- To remove the brew chamber, use your both thumbs
picture 1
- Reassemble follow above steps
To reach the components placed on the base handle as
picture 2
follows:
- First remove back cover, brew chamber and 3-way valve.
- Remove both Torx T15 screws see exploded view in the near
- Bend the 2 click snap locks with a screwdriver (see base),
- To remove the rest of the housing unlock the last 4 snap
- To reassemble follow above steps backwards.
OPTIONAL (accessories)
- XL watertank (10 Cups)
boiler.
brew chamber.
(see picture 3) and push
strongly with a little distortion
(rotation) until the brew
chamber comes loose.
backwards.
of position A.
and the housing can now be removed.
locks at the base and gently pull of the front cover.
Commercial type number HD7982
Service code : 4222 259 20100
HD7810/60/C
picture 3
2-6