Land Pride QuickHitch RBT35 Series Specification Sheet

Specifications & Capacities
Blades, Rear
Blade Width
Approximate Weight (lbs.)
with manual links
Maximum Tractor Horsepower
Maximum G.V.W. (lbs.)
Hitch Type
Blade Angle
Manual Linkage:
Hydraulic Cylinder:
Angle Cylinder
Blade OffsetManual Linkage
Hydraulic Cylinder
Offset Cylinder
Blade TiltManual Ratchet Jack
Hydraulic Cylinder
Tilt Cylinder
Moldboard King Pin
Moldboard Height
Moldboard Thickness
Cutting Edge
Main Frame Construction
Parking Stand
Accessories
Designs, specifications, features and information are subject to change without notice.
20
RBT35 Series
RBT3584
84"
709 lbs.
80 HP for 2 Wheel Drive and 65 HP for 4 Wheel Drive
9500 lbs.
Cat. 1 & 2
Fits Land Pride Quick-Hitch
With blade facing forward or reversed
o o
Up to 40 in 10 increments clockwise and counterclockwise
Up to 50 degrees clockwise and counterclockwise
3 1/2" X 14" X 1 1/4"
Up to 30 inches left and right in 9 positions (Center, 4 left and 4 right)
Up to 30 inches left and right
3 1/2" X 14" X 1 1/4"
o
Maximum 20 up and 20
o
Maximum 20 up and 20
2" X 6" X 1 1/4"
3" diameter
17" tall
5/16" reinforced, 3/16" tapered reinforcement channel
1/2" x 6" Heat treated, Replaceable & Reversible (Double bevel)
Fully Welded Tubular Construction
Retractable
Manual or Hydraulic Single Gauge Wheel
Skid Shoes, End Plates, Hydraulic Selector Valve and Cushion Valve
Top View
o
down with blade facing forward or reversed
o
down with blade facing forward or reversed
RBT3596
96"
745 lbs.
26808
Side View
6/10/10
301-251S