Access Control - D-Link DSL-526B User Manual

Section 3 – Configuration

Access Control

To access the Access Control windows, click the Access Control link in the Management directory.
To configure the Service Control List click the Services link. Enable or
disable the desired LAN and WAN services by ticking the appropriate
checkboxes. When you are finished, click the Save/Apply button.
Access Control – IP Addresses
To configure IP address access control click the IP Addresses link. Click
the Enable or Disable radio button to enable or disable Access Control
Mode. To add an IP address management station, click the Add button.
Enter the IP address of the management station permitted to access the
local management services in the IP Address field. When you are
finished, click the Save/Apply button.
D-Link DSL-526B User Manual 75