Section 4: Maintenance & Lubrication
Fill Plug
24503
24504
Fill Plug
3/27/12
Table of Contents
Inside the Skid shoe
15843
Drive Chain
Fill through top Fill plug and check quantity at lower plug.
Type of Lubrication: Shell Alvania EP00 gear lube
Land Pride #821-045C (32oz. bottle)
Quantity: 2 1/2 pints (Gear Lube will run out of lower plug
when full.)
Non-Drive Bearing
Grease gauge non-drive bearing every 10 hours
One grease zerk inside skid shoe
Type of Lubrication: Multi-Purpose Grease (Remove Skid
Shoe to grease)
Quantity: Add grease until grease begins to emerge from
either side of the axle.
Gearbox
Check Gear box oil level every 50 hours
Type of Lubrication: 1 1/2 pints of SAE 90W gear lube
Quantity: With gearbox level check oil in box by removing
plug from backside. If oil level is low remove top plug and fill
with lube until fluid flows from back port. Do not overfill.
PR1660, PR1672 & PR1690 Powered Rakes 314-216M
As
Required
10
Hours
50
Hours
21