HP ProLiant DL160 Gen8 User Manual page 62

CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
8.
page 10).
Install the TPM security rivet by pressing the rivet firmly into the system board.
9.
Install the PCI riser cage (on page 21).
10.
Install the processor air baffle (on page 20).
11.
Install the access panel (on page 19).
12.
Slide the server into the rack.
13.
Connect each power cord to the server.
14.
Connect each power cord to the power source.
15.
Power up the server (on page 17).
16.
If removed, install the rack bezel (on page 58).
17.
("System board components" on
Hardware options installation 62