Table of Contents
Advertisement
12 Installing an SSL certificate
The administrator can upload an SSL certificate to be used for site validation. The
web page for certificate upload can be accessed by clicking on the SSL-certificate link
in the main menu tree. Select the certificate and the Key provided by the verification
agency and click upload. The certificate and key will be installed automatically and
will come into effect after the system is restarted.
Please note that until the next restart the old certificate will remain effective. If for
any reason you wish to revert back to the default SSL certificate that was supplied
with the NTE, you can use the CLI to do so. Please refer to the relevant section in
Configuring the system through the Command Line Interface
13 Factory Reset
DVX-1000 configuration parameters can be set to factory default values through web
or 'RESET' switch on DVX-1000. The following section describes the functionality of
the factory reset feature.
13.1 Factory Reset Functionality
Factory
Reset
has
settings/configuration options that have been modified will be restored to the factory
defaults. When factory reset is enabled from the web interface of the DVX-1000 the
following changes will be effected to the system:
•
Licensing and feature information: All the licensed features that exist at
the time of factory reset will be retained across the reset.
•
Users and User Groups: Users and the user groups that have been
configured will remain as they are (i.e. after factory reset, the administrator
does not have to add the users and their groups again).Though the users are
still configured, all the features that have been enabled for the users are now
disabled. The users now have no features activated and the feature password
is reset back to the userid of the user.
•
Route Groups: All the configured users will be moved to the default route
group (LocalRouteGroup) with only a single local route group configured. Any
special routes that need to be added for the users will have to be reconfigured
after factory reset.
•
Hunt Groups: All hunt groups that have been configured will be deleted after
factory reset. These have to be added again after reset.
•
Registrations: All current active registrations will be retained in the DVX
database. This is so that the configured users are not forced to re-register
every time the DVX-1000 goes back to the factory default settings.
•
Gateways: All the PSTN and INET gateways configured will be deleted on
factory reset. These have to be reconfigured after reset.
•
Call Detail Records and alarms: All the call detail records and alarms will
be deleted on factory reset.
•
Default Authentication: Default Authentication after factory reset is set to
"False".
•
Auto Attendant, Voice mail and Operator Number: The current values of
auto attendant, voice mail and operator number will be retained across a
factory reset.
•
Feature Configuration: The feature access codes for all the features will be
retained during a factory reset.
•
RTP Port Range: After factory reset, the RTP port range will be reset to
7000-16000 (the factory default range).
D-Link Confidential
to
be
enabled
with
30
DVX-1000 User Manual
caution.
This
is
because
several
Advertisement
Table of Contents
