Table of Contents
Advertisement
4.2.12 Set Secondary NTP Server Command:
Command Name:
Command description:
Command Format:
Warning: Using the following commands to configure the system time will result in the time
configuration mode being set to manual. If you do not want this to happen, please undo the
change through the web page.
4.2.13 Set Zone Command:
Command Name:
Command description:
Command Format:
4.2.14 Set Date Command:
Command Name:
Command description:
Command Format:
4.2.15 Set Time Command:
Command Name:
Command description:
D-Link Confidential
e.g. set primaryntpserver 192.168.10.9
set secondaryntpserver
The
'set
secondaryntpserver'
configures the secondary NTP server address. It
will automatically sync the time with the NTP
server if not already sync with the primary NTP
server.
set secondaryntpserver <ipaddress>
e.g. set secondaryntpserver 192.168.10.10
set zone
The 'set zone' command sets the system time
zone. Use 'set zone ?' to get zone numbers.
set zone <zone number>
e.g. set zone 4 to set pacific time zone.
set date
The 'set date' command configures the system
date and time manually. All the parameters have
to be given in the same order as they appear in
the format below. However, the user can give
any
number
of
parameters will be set to current value.
set
date
<year>
<minute> <seconds>
e.g. set date 2005 Jan 30 10 35 45
set time
The 'set time' command configures the system
time manually. All the parameters have to be
12
DVX-1000 User Manual
command
parameter;
all
the
<month>
<day>
other
<hour>
Advertisement
Table of Contents
