Advertisement
Installation
Viewfinder Locking Levers
The 7-inch HDTV viewfinder LDK 4019/00 is intended
for use with the LDK6000 HDTV camera equipped.
The viewfinder is mounted on the Large Lens Adapter
(LDK 4482) or on the 7-inch viewfinder support
(LDK 6517).
CAUTION
Before connecting, make sure that the power
is switched off
To mount the viewfinder on top of the camera proceed
as follows:
a. Slide the viewfinder along the rails on top of the
camera until it can go no further.
02.34.5
Viewfinder Hood Locking Knobs
User's Guide LDK 4019/00 - 7-inch HDTV Viewfinder
Viewfinder Hood Support Slots
Hood Support Knobs
b. Push both locking levers inwards and slide the
viewfinder until it firmly engages the connector.
c. Release the locking levers and ensure they click
into the lock position.
To attach the viewfinder hood to the viewfinder proceed
as follows:
a. Clip the hood onto the slots on top of the viewfinder.
b. Swing it down and attach it to the support knobs on
the front of the viewfinder by pushing the two hood
locking knobs outwards.
c. Let go of the hood locking knobs and ensure that
the hood clips into place.
1-3
Advertisement
