Quartz Chronograph - Edox Watch Instruction Manual

The precision tolerance of a Venus move-
ment can be up to 1 minute per day.

4.4 Quartz chronograph

Edox 013, 019
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
to turn the hour hand until the desired
date is reached and push it back to posi-
tion 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1/10 of a second for up to
30 minutes (12 hours for the refer-
ence 013).
Pusher B: reset (after a stop)
Accumulated timing chronograph:
Press button A to start. Press button B
after arrival of the first "sprinter" – The
time will be indicated. Press button A after
arrival of the second "sprinter" – The time
is memorized. Read the time of the first
"sprinter". Press button B to read the time
of the second "sprinter" (the chronograph
hands will turn at a faster speed until indi-
cation of the time). Press button B to reset
hands to zero.
NB: the hands should be reset to their
original position before the chronograph is
used:
Resetting of the 1/10 seconds hand to
zero: crown in position 3 and pusher B.
Resetting of the 60 seconds hand to
zero: crown in position 3 and pusher A.
Resetting of the 30 minutes hand
(12 hours hand for the reference 013)
to zero: crown in position 2 and pusher B.
Only for reference 013:
Resetting of the 12 hours hand to
zero: crown in position 2 and pusher A.
After setting the hands to their original
positions, return to crown position 1.
Edox 015
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown back-
wards and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown
forwards or backwards. Synchronise the
seconds by pushing the crown back to
position 1 to coincide with a given time
signal.
Chronograph functions:
Pusher A: start – stop, start – stop, etc.
Timing to 1 second for up to 60 minutes
Pusher B: reset (after a stop)
Split Time function
Pusher A: start
Pusher B: stop to read the split time.
The chronograph continues to operate.
Pusher B: restart
The chronograph hands catch up with the
elapsed time.
Pusher A: for the last stop and to display
the total time.
Pusher B: reset.
NB: the hands should be reset to their
original position before the chronograph is
used:
Resetting of the 60 minutes hand to
zero: crown in position 2 and pusher B.
Resetting of the 30 seconds hand to
zero: crown in position 3 and pusher A.
Resetting of the 5 minutes hand to
zero: crown in position 3 and pusher B.
After setting the hands to their original
positions, return to crown position 1.
Edox 10, 101, 103, 104
Watch functions:
The crown has 3 positions:
1. Normal position (wearing posi-
tion): when the crown is positioned
against the case, the crown ensures that
the watch is water-resistant.
2. Correcting the date: pull the crown
out to position 2, turn the crown forwards
and push it back to position 1.
3. Time setting: hours, minutes and sec-
onds. Pull the crown out to position 3. The
seconds hand will stop.
7