4. OPERATING INSTRUCTIONS 4.1 SELF WINDING (AUTOMATIC) CHRONOGRAPH 4.2 SELF WINDING (AUTOMATIC) WATCHES 4.3 HAND WINDING WATCHES 4.4 QUARTZ CHRONOGRAPH Movement number Movement number page 0165 Movement The first 2 or 3 digits of the reference represent the Edox movement code.
• Edox watches bought from non your timepiece is under water or if it is wet and ensure that the crown and pushers The warranty of your Edox watch is valid authorized retailers since Edox is not are properly pushed back or screwed...
Helium The everyday activity of life is sufficient in maintenance service or battery itself to wind up an automatic Edox watch escape valve). The models wearing a non- replacement? and it will run continually, even if it is...
30 to 1500 meters. Check the vent water from penetrating details on the back of your Edox timepiece mechanism. The operating instructions are related to and read the following instruction care- the reference of the movement (calibre) in 3.6 PVD (Physical Vapour fully.
Correcting the day for the references (12 hours scale). seconds hand will stop. Turn the crown 011: pull the crown out to position 2, turn forwards or backwards. Synchronise the Press the pusher knob (C) until the the crown backwards, then push the crown seconds by pushing the crown back to desired date is displayed (hand (6)).
Watch functions: Watch functions: to prevent damages. Do not set the time The crown has 2 positions: when the ring is activated. Edox declines The crown has 3 positions: all responsibilities of misuse. 1. Normal position (wearing posi- 1. Normal position (wearing posi-...
2. Time setting: hours and minutes. Pull Pusher B: restart makes a full turn. Then press the 4 o’clock the crown out to position 2. Turn the pusher and adjust the day counter to crown forwards or backwards. Push the The chronograph hands catch up with the «...
Page 8
Accumulated timing chronograph: Monday and Sunday. Then adjust the day Press pusher A. stop of timing by pressing the 4 o’clock pusher. Press button A to start. Press button B after Press pusher A: re-start of timing arrival of the first “sprinter” – The time will When finished, press the crown into posi- be indicated.
Page 9
Date setting (changes from 31 to 1): Adjusting the 1/10 second counter hand Use Button A to adjust the first hand Press the corrector C once to adjust the (at 6h): press pusher A (press lightly for a phased adjustment, date 1 day forward.
Page 10
Movement 40 Setting sequence for: moonphase Full moon dates display, date, day of the week and Watch functions: time: 2017 2018 2019 The crown has two positions: I and II. Pull the crown in position II (the watch 2 – 31 Pusher A at 5 o’clock, pusher B at 8 stops) o’clock...
1. Normal position (wearing posi- Turn the crown forwards or backwards. against the case, the crown ensures that tion): when the crown is positioned Push the crown back to position 1. the watch is water-resistant. against the case, the crown ensures that 2.