Dropped Or Damaged Computer; E-Mail, Modem, And Internet Problems; Error Messages - Dell OptiPlex SX270 User Manual

Dropped or Damaged Computer

CAUTION: Before you begin any of the procedures in this section, follow the steps in
Check the card and cable connections —
1. Turn off the computer and devices, disconnect them from their electrical outlets, wait 10 to 20 seconds, and then open the computer
cover.
2. Check all card connections in the computer, and reseat any loose cards.
3. Ensure that all cables are properly connected and that all components are properly seated in their connectors and sockets.
4. Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on.
5. Run the Dell Diagnostics. If any of the diagnostics tests fail,

E-Mail, Modem, and Internet Problems

Check the telephone line connection —
label or a connector-shaped icon next to it.) Ensure that you hear a click when you insert the telephone line connector into the modem.
Check the telephone jack — Disconnect the telephone line from the modem and connect it to a telephone. Listen for a dial tone.
Connect the modem directly to the telephone wall jack —
machine, fax machine, surge protector, or line splitter, then bypass them and use the telephone to connect the modem directly to the
telephone wall jack.
Use a different telephone line —
Run the Modem Helper diagnostics —
the screen to identify and resolve modem problems. (Modem Helper is not available on all computers.)
Verify that the modem is communicating with Windows® —
1. Click the Start button and click Control Panel.
2. Click Printers and Other Hardware.
3. Click Phone and Modem Options.
4. Click the Modems tab.
5. Click the COM port for your modem.
6. Click Properties, click the Diagnostics tab, and then click Query Modem to verify that the modem is communicating with Windows.
If all commands receive responses, the modem is operating properly.
Turn off call waiting (catch-phone) —
networking connection properties.
1. Click the Start button and click Control Panel.
2. Click Printers and Other Hardware, and then click Phone and Modem Options.
3. Click your connection type to highlight it.
4. Click the Dialing Rules tab and click Edit.
5. Click the To Disable Call Waiting box to place a check mark in it.
6. Select the disable code from the drop-down menu (for example, *70).
7. Click Apply and click OK.
Ensure that you are connected to the Internet —
mark next to it, click the checkmark to remove it and connect to the Internet.
Ensure that you have subscribed to an Internet service provider —
Contact your Internet service provider —

Error Messages

If the message is not listed, see the documentation for the operating system or the program that was running when the message appeared.
A filename cannot contain any of the following characters: \ / : * ? " < > | —
A required .DLL file was not found —
program:
1. Click the Start button and click Control Panel.
2. Click Add or Remove Programs.
3. Select the program you want to remove.
4. Click the Change or Remove Program icon.
5. See the program documentation for installation instructions.
Alert! Previous attempts at booting this system have failed at checkpoint [nnnn ]. For help in resolving this problem, please note this
checkpoint and contact Dell Technical Support —
error. Contact Dell and report the checkpoint code (nnnn) to the support technician.
Attachment failed to respond —
contact
Verify that the telephone line is connected to the jack on the modem. (The jack has either a green
If you have other telephone devices sharing the line, such as an answering
If you are using a line that is 3 m (10 ft.) or more in length, try a shorter one.
Click the Start button, point to All Programs, and then click Modem Helper. Follow the instructions on
See your telephone directory for instructions on deactivating this feature. Then adjust the dial-up
With the Outlook Express e-mail program open, click File. If Work Offline has a check
Contact your Internet service provider for assistance.
The program that you are trying to open is missing an essential file. To remove and then reinstall the
The computer failed to complete the boot routine three consecutive times for the same
The floppy or hard drive controller cannot send data to the associated drive. See
"CAUTION: Safety
Dell.
Contact an Internet service provider to subscribe.
Do not use these characters in filenames.
Instructions."
"Floppy drive problems" or