Saeco Energica HD8851 User Manual page 60

ENGLISH
58
STEP 2/2 RINSING
PAUSE
12 Empty the container and place it back under the dispensing spout.
Press the " " button.
13 The rinsing cycle is activated. The bar shows the cycle progress.
14
When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process by showing this display after a short heating up phase.
15
Remove and empty the container.
16
Remove and wash the hot water dispensing spout.
17 Empty the (internal) drip tray and place it back.
18
Place back the "INTENZA+" water fi lter into the water tank if it was
installed.
19 The descaling cycle is now complete.
Note:
At the end of the descaling cycle, wash the brew group as described in the
"Weekly Cleaning of the Brew Group" chapter.
The rinsing cycle is performed in order to have the circuit cleaned with
a preset amount of water to ensure proper machine performance. If the
water tank is not fi lled up to MAX level, the machine might require two or
more cycles.