Installing the WinTV-PVR board
The WinTV-PVR is a Plug & Play device designed for Microsoft
Windows
®
98SE/Me/2000/XP . Plug & Play simplifies the installation and
hardware setup of WinTV by having hardware settings assigned by
Windows. This section describes how to install these boards using the
Plug & Play installation.
To install WinTV-PVR under Windows 98SE/Me/2000 or Windows XP ,
you will follow these steps:
Install the WinTV-PVR board in your PC and connect the cables
After booting Windows, you will install WinTV Windows device driver
from the WinTV-PVR Installation CD-ROM
After the Windows driver is installed, you will install the WinTV appli-
cation software from the WinTV-PVR Installation CD-ROM
Installation overview
®
1-1