La Crosse Technology WS 550 US Operating Instructions Manual page 10

2. Lock in the foot support in the lock-
ing nose of the glass foot and place
it on the two screw domes.
3. Screw the enclosed Allen key and 2
Allen screws on the glass foot.
Please note that the lighting cable of
the device foot is guided in from the
side as shown in the picture so that
it does not get crushed.
4. Place the weather station at the
locking nose of the foot support
and tilt it on the foot support till the
screw dome neatly grips into the
corresponding intakes of the weather
station.
Note!
Do not let go of the weather station
till both the Allen screws have been
fixed in (see next step)!
Please do not press the display
when you hold the weather station.
Hold the weather station only at the
frame!
0