Media Type For Print Output - Kyocera Mita FS-1128MFP Operation Manual

Media Type for Print Output

Specify the paper type to be used for print output of the received fax.
Supported paper types: All Media Type, Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted,
Bond, Cardstock, Color, Prepunched, Letterhead, Envelope, Thick, High Quality, Custom 1 to 8
NOTE:
Refer to the machine's Operation Guide for details on Custom Paper 1 to 8.
FAX Media Type:
1 *All Media Type
*********************
2
Plain
3
Transparency
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette. Faxes will be automatically
reduced to the set paper size.
OPERATION GUIDE
1
Press the System Menu/Counter key.
2
Press the
3
Press the OK key.
4
Press the
5
Press the OK key.
6
Press the
7
Press the OK key.
8
Press the
a b
type. If you do not specify any paper type, select
[All Media Type].
9
Press the OK key.
1
Press the System Menu/Counter key.
2
Press the
3
Press the OK key.
4
Press the
5
Press the OK key.
6
Press the
[Cassette 2 Set.] or [Cassette 3 Set.].
NOTE:
[Cassette 2] and [Cassette 3] are shown when
the optional paper feeder is installed.
Setup and Registration
or key to select [FAX].
or key to select [Reception].
or key to select [FAX Media Type].
or key to select the desired paper
or key to select [Common Settings].
or key to select [Orig./Paper Set.].
or key to select [Cassette 1 Set.],
6
6-11