Important Message; Set Up Your Wd-2512; Hardware Installation - WEATHER DIRECT WD-2512U Owner's Manual

IMPORTANT MESSAGE:

Please DO NOT insert batteries into the Wireless Display or the Outdoor Sensor
until instructed to do so.
Connect the Gateway to an available LAN port on your network router with the
LAN cable (included) and then power up the Gateway with the AC Adapter
(included).

Set Up your WD-2512

NOTE: The Quick Set-Up Card that is included in the box contains additional
instructions to help you get started quickly if you want to perform a basic setup of
your Weather Direct® system without reading this entire manual.
Open www.weatherdirect.com
of the page. Our Online Registration Wizard will guide you through the complete
registration process.

Hardware Installation

NOTE: Hardware installation is only intended to be performed after you have
registered your Gateway and Wireless Display, inserted batteries into the
Wireless Outdoor Temperature Sensor, and have confirmed successful reception
of weather data.
in a web browser and click "REGISTER" at the top
Page 7 of 26
Version 1.2 - 9/23/2008