Table of Contents
Advertisement
IMPORTANT MESSAGE:
Please DO NOT insert batteries into the Wireless Display or the Outdoor Sensor
until instructed to do so.
Set Up your Weather Direct
Open
www.weatherdirect.com
of the page. Our Online Registration Wizard will guide you through the complete
registration process.
Hardware Installation
NOTE: Hardware installation is only intended to be performed after you have
registered your Wireless USB Transceiver and Wireless Display and have
confirmed successful reception of weather data.
TX-50U Wireless Outdoor Sensor Installation Options
The Wireless Outdoor Temperature Sensor – Measures the outdoor temperature
where you are and sends temperature data to your Wireless Display with a
wireless range of up to 330 feet (open air). See
details on how to add this sensor to your system.
NOTE: Move the Wireless Outdoor Sensor into its intended location and wait for
10 minutes to make sure the outdoor temperature is still being received by the
Wireless Display. Press the "+" Key on your Wireless Display to show the
outdoor temperature. If the display shows - -,-F for the outdoor temperature, the
signal cannot reach the Wireless Display. Find a closer location to mount the
Wireless Outdoor Sensor and wait 10 minutes to check the Wireless Display
again for reception.
DO NOT mount the Wireless Outdoor Sensor in a permanent fashion until
you are sure the signal is being received by the Wireless Display.
To Surface Mount the Outdoor Sensor:
We have provided a mounting plate that you can attach to a surface
with the supplied screws. The Sensor can be positioned on a flat
surface by securing the stand to the bottom by gently pushing the
in a web browser and click "REGISTER" at the top
Page 7 of 22
Version 1.0 - 12/17/2010
www.weatherdirect.com
for
Advertisement
Table of Contents
