Table of Contents
Advertisement
Factory Reset of Wireless Display
NOTE: It is not possible to re-register a previously registered Wireless Display
under a new account until the Wireless Display has been deleted from the user
account on
NOTE: Expansion Options that are Lifetime Upgrades are still active on your
Wireless Display even if you delete it from your user account on
www.weatherdirect.com
and other custom settings will need to be performed again if the Wireless Display
is re-registered.
WARNING: The Factory Reset procedure will erase any registration and setup
information from your Wireless Display. You must register the Wireless Display
again with
WARNING: Deleting the Wireless Display from a user account on
www.weatherdirect.com
as forecast locations from the Wireless Display.
If you have trouble registering your Wireless Display after multiple attempts, you
can try a Factory Reset.
If you wish to give your Wireless Display to someone else or simply to register it
under a different user account, you must perform the Factory Reset to clear the
registration information from the memory of the Wireless Display and delete the
device from the user account on
Additional diagnostic and reset information, including how to reset the gateway (if
necessary), is contained at
TO PERFORM THE FACTORY RESET:
Hold both the "SET" and "ALM" Keys down together for about 6 seconds; you will
hear a double beep. This resets the Wireless Display to the original factory state.
FREE Trial of Expansion Options for 14 Days
When you register your Wireless Display and have the included forecast location
selected, you will be given the opportunity to try our most popular Expansion
Options FREE for 14 Days! NO CREDIT CARD OR PAYMENT REQUIRED!
Press the '+" Key to view second part of the Device ID under
"SEC 2"
Press the "SET" Key to exit SET mode
www.weatherdirect.com
or perform a Factory Reset. The selection of locations
www.weatherdirect.com
will erase the weather and other setup information such
www.weatherdirect.com
www.weatherdirect.com/help
Page 16 of 25
Version 1.1 - 11/10/2008
and a Factory Reset has been performed.
to use it after a Factory Reset.
Advertisement
Table of Contents
