Makita 6016 Instruction Manual

Drill

Hide thumbs Also See for 6016:

Table of Contents

Download this manual See also: Instruction Manual

INSTRUCTION MANUAL

Drill

6016

013432

IMPORTANT: Read Before Using.

Table of Contents

Page 1 INSTRUCTION MANUAL Drill 6016 013432 IMPORTANT: Read Before Using.
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 6016 Steel 16 mm Capacities Wood 36 mm No load speed (min Overall length 365 mm Net weight 4.4 kg Safety class Class I • Due to our continuing program of research and development, the specifications herein are subject to change without notice.
Page 3: Drill Safety Warnings
12. Use personal protective equipment. Always 23. Keep cutting tools sharp and clean. Properly wear eye protection. Protective equipment such maintained cutting tools with sharp cutting edges as dust mask, non-skid safety shoes, hard hat, or are less likely to bind and are easier to control. hearing protection used for appropriate conditions 24.
Page 4: Functional Description
Installing or removing drill bit FUNCTIONAL DESCRIPTION 1. Tighten CAUTION: 2. Chuck key Always be sure that the tool is switched off and • unplugged before adjusting or checking function on the tool. Switch action 1. Switch trigger 2. Lock button 013434 To install the bit, place it in the chuck as far as it will go.
Page 5: Operation
To maintain product SAFETY and RELIABILITY, repairs, the tool performance and shorten the service life any other maintenance or adjustment should be of the tool. performed by Makita Authorized Service Centers, There is a tremendous twisting force exerted on • always using Makita replacement parts.
Page 8 Makita Corporation www.makita.com 883234C8...