27" LCD Color Monitor
3. Operation instructions
3.1 General Instructions
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the
monitor automatically saves those changes. The changes are also saved if you change the settings and then
wait for the OSD menu to disappear.
1. Push the MENU button to open the OSD menu and display the main menu.
Main Menu for PC (Analog (VGA), Digital (DVI-D)) Input
Or
Main Menu for Non PC (Analog (VGA), Digital (DVI-D)) Input
NOTE:
AUTO ADJUST is only available when you are using the analog (VGA) connector.
2. Push the
and
the option name is highlighted. See the table for a complete list of all the options available for the monitor.
3. Push the MENU button once to activate the highlighted option.
4. Push
and
button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the
menu, to make your changes.
6. Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
3.2 Control Buttons
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As
you use these buttons to adjust the controls, an OSD shows their numeric values as they change.
buttons to move between the setting options. As you move from one icon to another,
and
buttons, according to the indicators on the
6
Dell 2707WFP