27" LCD Color Monitor
6. Mechanical Instruction
Tools: 2 Power screwdrivers(φ=5mm、L=60mm); 1 small cross screwdriver; turnbuckle driver;
Setting: Power screwdriver torque A=11 kgF. Cm; torque B=6 kgF. Cm
Note: Firstly, put the monitor on a soft, flat and clean surface.
Fig
35
Dell 2707WFP
Remark
Remove stand:
Remove the four screws and
remove the stand by
Torque A.
1. Pull out the hinge cover follow the
arrowhead direction and remove it,
then remove the signal cable.
2. Remove the four screws and
remove the base by
Torque A.