Kambrook Blitz2Go KBL20 Instruction Booklet page 9

Using Your Kambrook Blender
4. Screw the removable blade
holder onto the top of the
chosen bottle by turning the
removable blade holder in a
clockwise direction. Make sure
that the removable blade holder
is securely tightened to the bottle
(See Fig. 2).
IMPORTANT: Blades must
be handled carefully as
they are sharp!
5. With the ingredients inside and the
removable blade holder screwed
on, flip the bottle so that the
removable blade holder is facing
down (See Fig. 3). The blender is
now ready to be assembled onto
the motor base.
8
6. With one hand on the motor
Fig. 2
7.
8.
9.
Fig. 3
continued
base and the other hand holding
the assembled bottle, place the
assembled bottle inside the motor
base. Align the "
the removable blade holder with
" " symbol on the motor base
(See Fig. 4). Once aligned, push
down and turn the bottle in the
direction of the "
the motor base. Make sure that
the bottle is securely locked inside
the motor base.
Plug the power cord into a 230V
or 240V power outlet and switch
on at the power point.
Press down onto the 'BLITZ' button
to start blending. Do not blend for
more than 30 seconds at a time.
To stop blending at any time,
discontinue pressing down on the
'BLITZ' button.
To remove the assembled
bottle from the motor base,
turn the assembled bottle anti-
clockwise and pull it away from
the motor base.
" symbol on
" symbol on
Fig. 4