Care, Cleaning And Storage; Cleaning The Exterior Motor Base - Kambrook Blitz2Go KBL20 Instruction Booklet

Care, Cleaning and Storage

Ensure the blender has completely
stopped operation by not pressing
down on the 'BLITZ' button.
Switch off at the power outlet and
unplug the power cord.
Carefully unscrew and remove the
blade holder from the plastic bottle.
Wash the blade holder in warm soapy
water and dry thoroughly.
Ensure all liquids have been removed
from the plastic bottles. Wash the
bottles with warm soapy water. Use
a plastic bottle brush to clean any
tough foodstuffs left inside the bottle.
Dry thoroughly.
IMPORTANT: Blades must
be handled carefully as
they are sharp!
NOTE: Do not immerse the
motor base, power cord or
power plug in water or any
other liquid.
NOTE: Do not place any parts of
the blender in the dishwasher.
NOTE: Kambrook does not
recommend the plastic bottles
are put in the dishwasher.
Dishwashers vary in the market,
some dishwashers may have
hot spots that distort the plastic.
10
NOTE: There are rubber seals
situated under the drinking
lids and inside the removable
blade holder to prevent
leaking. In case these seals
come out, wash in warm soapy
water, rinse and dry thoroughly.
Correctly refit the seals into the
lid or inside the blade holder
before using.
Cleaning the Exterior
Motor Base
The motor base can be cleaned
with a soft, damp cloth (do not use
abrasive agents or cloths which can
damage the surface). Dry and polish
with a soft, lint-free cloth.
Storage
Before storing, thoroughly wash and
dry all removable parts.
Assemble the blender and store on
the kitchen bench or in a cupboard.
Store out of reach of children.
Store the appliance upright.
Do not store anything on top of
the appliance.