Lenovo ThinkStation P500 Manual page 131

9. Install the bracket with the new storage drive into the front-access storage enclosure, and then close the
handles on both sides of the bracket.
Note: Ensure that the storage drive connectors are aligned with the corresponding connectors in
the front-access storage enclosure.
Figure 84. Installing the storage drive bracket
10. Pivot the front cover of the front-access storage enclosure until it snaps into position.
Figure 85. Closing the front cover of the front-access storage enclosure
11. Install the front-access storage enclosure into the optical drive bay. See "Installing or replacing a device
in the optical drive bay" on page 80.
12. Connect the signal cable, the power cable, and the front cover control cable to the front-access storage
enclosure.
.
Chapter 9 Installing or replacing hardware
119