Getting Started; Charging The Battery - Kyocera 3250 User Manual

1 G S
ETTING
Installing the battery
Hold the phone face down.
1.
Press down on the latch on
2.
the back of the phone and
pull off the battery door.
Place the battery in the
3.
phone casing with the
metal contacts facing the
antenna end of the
phone.
Place the battery door notches
4.
in the opening near the
bottom of the phone. Push
down on the door until it
clicks into place.
User Guide for the Kyocera 3250 Phone
TARTED

Charging the battery

You must have at least a partial charge in the battery to
make or receive calls.
Fully charge the battery before
.
using the phone
To charge the battery, connect
the AC adapter to the jack on
the side of the phone (as
shown), then connect the
adapter's plug into a wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery: You can safely recharge the
battery at any time, even if it has a partial charge.
1