Table of Contents
Advertisement
Precautions for Operation
Do not drop monitor or door
Keep away from humidifier and
camera, and avoid strong
stove. High temperature and
impact.
humidity can cause breakdown.
When cleaning, never use wet
Keep picture clear by cleaning
hands, volatile benzene or paint
camera window frequently with
thinner.
soft cloths.
Installation Precautions
Monitor and camera must be installed away from direct
�
light and counter light.
Camera must be installed at a place free from rain.
�
�
Standard height of monitor must be 1,450mm~1,500mm
from ground, centered around brawn tube.
�
Camera should be installed on the wall in which cement
is completely dry.
If installed during winter season at temperature below
�
-5� , condensation might be generated inside monitor and
camera due to temperature difference between indoors
and outdoors. To prevent breakdown due to such
condensation, connection should be made in 2 hours or
more after installation.
Do not install monitor and camera in locations subject to
�
direct heating as harmful gases may subsequently be
emitted in significant amounts.
6
Keep away from devices
generating strong magnetic field
(TV, Speaker, etc.) (Picture can
be disturbed or blurred and
breakdown can result)
As this device consists of
electronic precision
components, and high voltage
is generated internally, do not
attempt to disassemble.
Stop up P.V.C. pipe using
adiabatic substances, to
prevent air circulation
※Stopping up pipe as above minimizes
temperature difference between indoors and outdoors, and
also eliminates moisture and condensation on door camera
window.
Component' ' s Name
5 inch LCD �
Identifying visitors
Contrast control switch �
Brightness control switch �
Color tone control switch �
Communication LED�
Speaker �
Communication Button�
When receiving the call signal from interlocked
outside equipment, user can communicate with
it after pressing this button
Guardroom/Lobby Button �
� Main Line Port from Lobby phone:
A Port used when multi-home wiring is needed.
KIV-212
For further information, see the instruction sticker
or installation specifications
�Camera1 Port
A Port connecting to in-house camera
�Camera 2 Port
A Port connecting to in-house camera
� Front Door Opener Port:
A Port connecting to front door opener
� House No. setting switch
�Power Cord: AC 100V - 240V
Power Switch �
KC-C60 Camera & KC-MC35 Metal Pinhole Camera
�C-Mic
To communicate with Monitor.
�Camera Lens
Clear picture quality realized
by adopting image sensor
�Power Lamp
To check power ON/OFF status.
�Call Button
By pressing the button, the related
house will be called.
�Speaker
When visitor calls, the voice from monitor
comes out of the speaker.
� MIC : Sending the voice to lobby phone,
guard phone, camera and other equipment
connecting to in-house line
� Power LED
� Door Open Button : Pressing this button
while communicating, user can
automatically open the front door and
common gate
� Front Door Button :
When receiving the call signal from front door,
user can communicate with front door after
pressing this button
� In-house Line Button :
Used in inner line call and communication
DC INPUT(DC 17V±2V)�
KIV-D212
�Power Cord: DC 17V±2V
� Volume control switch
※Option
7
Advertisement
Table of Contents
