New Mode - Omron KIV-212 User Manual

2. Precautions for DIP Switch Setting (House No. Setting)
1) After setting DIP switches, device power should be reset.
(In power switch ON state, DIP switches cannot be set.)
2) For direct button type lobby phone, up to 12 houses can be set.
Thus, when DIP switches of house interphone and video phone are set, available houses are also 1 to 12
in number.
For Common gate pannel (KDP-104/KDP-108/KDP-112) and Lobby Phone (KLP-104/KLP-108/KLP-112,
KLP-C104/KLP-C108/KLP-C112, KLP-P104/KLP-P108/KLP-P112), house (KVM-520 and KIP-603,
KIV-102, KIV-D102, KIV-212, KIV-D212, KCV-802R, KCV-D802R) No. setting should be conducted
as following instructions. (A specification preset by internal protocol)
11
9
7
5
3
1
A
House No. (DIP Switch) Setting for direct button type.
(Warning!) House device should be set as described above (Fix house No. type).
3) If user wants to use interphone or video phone as sub-phone, all DIP switches should be in OFF state.
4) When user sets DIP switches, excessive impact on DIP switches may cause abnormal or erroneous
operation of device.
24
12
10
8
�
6
4
2
B
House Setting No.
DIP Switch Setting at House Interphone and Video Phone

■NEW MODE :

It is available to set from No. 1~1599.
1) DIP SW 1~4, it is available by 15, the sum of 1248. In case of 2 digits from 9
are available by No.9. And 10~15(A~F HEX code)' s setting is 9.
2) DIP SW 5~8 is available by 15, the sum of 1248. In case of 2 digits from 9
are available by No.9. And 10~15(A~F HEX code)' s setting is 9.
3) DIP SW 9~12 is available by 15, the sum of 1248.
There should be no mixed protocol in a system. Mixed protocol in a system can make
the malfunction of system.
KIP-120 and KLP-100 Series only matching with over 4.0 version's NEW MODE.
ex1)
ex2)
800
400
200
100
80
40
20
10
8
4
2
1
1. If DIP SWITCH from 1 to 12 is put to ON, the numbers of DIP SWITCH will be
summed up.
ex1) If the switches 1 and 2 are put to ON, the setting number becomes 1+2=3.
ex2) If the switches 1 and 3 are put to ON, the setting number becomes 1+4=5.
100~1,500
10~90
1`~9
The numbers are the setting number
when the switch is put to ON.
25