Optional Accessories And Replacement Parts; Specifications - Shure PGADRUMKIT4 User Manual

Optional Accessories and
Replacement Parts
Microphone Clip for SM58, SM57, SM87A,
Beta 87A, Beta 87C, PGA57, PGA58, PGA48,
PGA81
Black Foam Windscreen for PGA81, SM94
and SM137
7.6 m (25 ft.) Cable (XLR-XLR)
5/8" to 3/8" Thread Adapter
Vinyl zippered storage bag
Drum Microphone Mount
Grille
PGA57 Replacement Grille
PGA56 Replacement Grille
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.
shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: info@shure.de
6

Specifications

PGA52
A25D
Type
Dynamic (moving coil)
A3WS
Frequency Response
50 to 12,000 Hz
C25J
Polar Pattern
Cardioid
31A1856
Output Impedance
95B2324
150 Ω
AP56DM
Sensitivity
RPM154
at 1 kHz, open circuit voltage
-55 dBV/Pa¹ (1.75 mV)
RPM152
Polarity
RPM152
Positive pressure on diaphragm produces positive voltage on pin 2 with
respect to pin 3
Weight
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature
1 Pa=94 dB SPL
-20° to 165°F (-29° to 74°C)
Relative Humidity 0 to 95%
10 cm (4 in.)
Typical Frequency Response
Typical Polar Pattern
60 cm (2 ft.)
1000 Hz