Replacing The Back Cover; Procedure; Post-Requisites - Dell Inspiron 20 Service Manual

Replacing the Back Cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your
computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.

Procedure

1 Slide the hard-drive cable into the slot on the back cover.
2 Follow the instructions from step 1 to step 3 in "Replacing the
Buttons Board".
3 Carefully turn the back cover over and align the tabs on the back cover
with the slots on the display bezel.
4 Snap the back cover into place.
5 Replace the screws that secure the back cover to the display bezel.
6 Using your fingertips, pry the hard-drive door off the back cover.

Post-requisites

Follow the procedure from step 7 to step 12 in "Replacing the
24
Computer. After working inside your
After Working Inside Your
Control-
Hard Drive".