7.2 DIAGNOSIS
7.2.1 DISASSEMBLY
-
Removing the Case Unit(not shown)
1. Remove the Case Unit.
-
Removing the Panel Assy(Fig.1)
Remove the two screws.
Disconnect the connectors and then remove
the Panel Assy.
-
Removing the CD Mechanism Module
(not shown)
1. Remove the four screws.
2.Disconnect the connector, and then remove the
CD Mechanism Module.
-
Removing the Tuner Amp Unit(Fig.2,3)
Remove the three screws.
Remove the screw.
Remove the two screws.
Straighten the tabs at two locations indicated.
Remove the Tuner Amp Unit.
DEH-P600,P6000,P6050
Panel Assy
Tuner Amp Unit
Fig.1
Fig.2
Fig.3
83