Inserting The Battery - FujiFilm FINEPIX JZ500 Series Owner's Manual

Hide thumbs Also See for FINEPIX JZ500 Series:
Table of Contents

Advertisement

Inserting the Battery

After charging the battery, insert it in the camera as described below.
1
Open the battery-chamber cover.
A Note
Be sure the camera is off before opening the
battery-chamber cover.
C Cautions
• Do not open the battery-chamber cover
when the camera is on. Failure to observe this
precaution could result in damage to image
files or memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
6
2
Insert the battery.
Insert the battery with
the terminals first and the
orange stripe aligned with
the orange battery latch.
Slide the battery into
the camera, keeping the
battery latch pressed to
one side as shown below.
Confirm that the battery is securely latched.
Orange stripe
C Caution
Insert the battery in the correct orientation. Do
use force or attempt to insert the battery
NOT
upside down or backwards. The battery will
slide in easily in the correct orientation.
Battery latch

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents