Kyocera Sanyo Zio M6000 User Manual page 29

Call a Contact
1. On the Phone screen, touch the Contacts
tab.
2. Touch desired contact.
3. Touch .
Call a Favorite Contact
1. On the Phone screen, touch the Favorites
tab.
2. Touch of your favorite contact.
To save a Favorite contact, see "Add
Contacts to Favorites" on page 34.
Call a Number with Pause
Use the Pause function to send DTMF tones
from your phone. Your phone supports two
types of pauses:
• Hard Pause: Add a hard pause to indicate
that the succeeding numbers are DTMF
tones. For every hard pause, a message
appears to confirm whether to send the
tones.
• 2-sec Pause: This is a 2-second interval in
sending DTMF tones. To increase the
interval, add a succession of 2-sec pause.
For example, to have an interval of 4
seconds, add two 2-sec pause.
1. On the Phone screen, touch the keypad to
enter number to call.
2. To add a hard pause, touch Menu > Add
wait. ";" appears to indicate the hard pause
User Guide
location. To add a 2-sec pause, touch Menu
> Add 2-sec pause. "," appears to indicate
the 2-sec pause location.
3. Touch the keypad again to enter number of
the DTMF tone.
Note: Repeat the above procedures to add
more pauses.
4. Touch . Your phone dials the number
before the hard pause then sends the DTMF
tones upon confirmation. For 2-sec pause,
your phone will send the DTMF tones
automatically after 2 seconds.
Call a Number with Prepend
Prepend is used to add prefix numbers in front
of a phone number. For example, if your
contact entry is saved without an area code and
you are out of town, use the prepend function
to add the area code before calling the number.
1. On the Phone screen, touch the Contacts
or Call log tab.
2. Touch and hold a name or number from the
list.
3. Touch Prepend.
4. Touch the keypad to enter the number you
want to add before the phone number.
5. Touch .
29