Security; Check Memory Status - Kyocera TOMO S2410 User Manual

Security

This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information.
All security features are shielded by a
four-digit lock code (typically 0000 or the last
4 digits of your phone number).
Lock Phone
Set Lock Phone
With your phone locked, you can call only
emergency numbers or your service provider's
customer service number. You can still receive
incoming calls.
1. From Security, enter your four-digit lock
code.
2. Select Lock Phone > OK and one of the
following:
– On power up locks the phone every
time you turn it on.
– Now locks the phone immediately.
Unlock the Phone
1. From the home screen, select Unlock.
2. Enter your four-digit lock code.
42
Set Limit Calls
You can limit the calls that can be made from
your phone to emergency numbers, your
contacts, and your service provider's numbers.
1. From Security, enter your four-digit lock
code.
2. Select Limit Calls and one of the
following:
– No Limit does not limit calls.
– Limit Outgoing limits outgoing calls
while incoming calls still work.
– Limit All limits both incoming and
outgoing calls.
Change Lock Code
Change your lock code from the default.
1. From Security, enter your four-digit lock
code.
2. Select New Lock Code > Yes.
3. Enter a new four-digit code.
4. Re-enter your new lock code.

Check Memory Status

From Memory Status, check how much
memory is being used by your phone.
Security