Table of Contents
Advertisement
82-N8757-1EN.book Page 60 Wednesday, April 26, 2006 10:47 AM
To wake up the phone:
Say "
" and listen for a tone.
1.
Wake Up
Say "
" again until you hear two tones.
2.
Wake Up
If the phone does not recognize your
"Wake up" command, see "Training voice
recognition" on page 60.
Answering the phone
You can set your hands-free headset to (1)
answer automatically or (2) answer using a
voice command.
Answering automatically
You can set your phone to answer automatically.
This setting also works with the portable
Note:
hands-free headset.
→
→
• Select
Menu
Settings
→
Call answer
After 5 seconds
Answering using voice commands
If Auto-Answer is turned off, you can use a voice
command to answer an incoming call using the
installed hands-free headset.
→
→
• Select
Menu
Settings
→
.
Auto-Answer
Disabled
To activate the Voice Answer setting:
→
→
Select
1.
Menu
Settings
.
Voice answer
Highlight
and press
2.
Enabled
60
To answer a call:
When you receive an incoming call, the phone
responds: "Incoming call, answer?" If the caller is
recognized as a contact entry in your phone, then
the phone says "Incoming call from
(Name), answer?"
• Say "
Ignoring an incoming call
To ignore an incoming call, do one of
the following:
• Say "
the alert.
• Remain silent. The voice alert repeats twice
and the phone rings once, then returns to the
main screen.
→
Accessories
Training voice recognition
.
If your phone is having trouble recognizing your
voice, you can train it with the commands
, and
No
Select
1.
Select
2.
→
Accessories
Read the message and press the left softkey
3.
returns you to the previous screen.
→
Call options
Select
4.
Follow the prompts for each word until
5.
.
training is complete.
" or press any key except
Yes
" and press
to silence
No
.
Wake up
→
→
Menu
Settings
Call options
.
Voice training
to select
and continue.
OK
or the item you want to train.
Train All
Using Voice Recognition
.
,
Yes
.
Cancel
Advertisement
Table of Contents
