Table of Contents
Advertisement
13 Voice Commands
Voice commands allow you to call a contact, dial
a phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end
a call; you must press the
is open.
Voice dial list
To call or find a contact using voice dial you
must add the contact to your voice dial list.
The contact name must not have more than
three words or components in a contact name
for voice dialing recognition.
Add contacts
To add a contact to your voice dial list:
1. Select
>
Menu
Contacts
2. At the contact list, highlight a contact
and press the
OK
appears next to a name when voice
dialing is active. Check each name you
wish use with voice dialing.
3. Select
.
Save
User Guide
key when the flip
End
>
Voice Dial List
key. A check mark
Remove contacts
To remove a contact from your voice dial list:
1. Select
Menu
2. At the contact list, highlight a check marked
contact and press the
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish removed from voice dialing.
3. Select
Save
Voice commands
Start voice commands
1. From the home screen, press the
initiate voice commands. The phone
prompts, "Say a command".
.
2. Say one of the following commands and
following the voice prompts.
– "
Contact <name>
your voice dial list.
– "
Dial Number <number>
speaking the digits of the phone number.
– "
<shortcut name>
menu item.
– "
Find Contact
contact from your voice dial list.
>
>
Contacts
Voice Dial List
key. No check
OK
.
" call to a contact on
" call by
" sends you to a
" allows you to find a
.
key to
Send
55
Advertisement
Table of Contents
