Side Turn Signal Lights - Chevrolet Spark Owner's Manual

184 Vehicle care
3. Tail light/brake light (1)
Turn signal light (2)
Reverse light (passenger's side) /
Rear fog light (Driver's side) (3)
4. Rotate bulb holder anti-clockwise.
5. Remove bulb holder. Push bulb
into socket slightly, rotate anti-
clockwise, remove and renew
bulb.
6. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and
engage.
7. Switch on ignition, operate and
check all lights.

Side turn signal lights

1. Push light towards the back of the
vehicle and remove.
2. Rotate bulb holder anti-clockwise.
3. Pull bulb out of the bulb holder and
renew.
4. Reinstall in reverse order.