Kyocera QCP 2035 User Manual page 27

Roam Option
This setting determines which signals
your phone will accept.
3 3
1. Select Menu Settings Network
Roam Option .
2. Press to select an option:
Automatic
• (recommended setting)
Accept any system the phone
service provides.
No Roaming—
• You cannot make or
receive calls outside of your home
service area.
Roam/Service Alert
Use this setting to have the phone alert
you if you roam outside of your home
service area.
3 3
1. Select Menu Settings Network
Roam/Srvc Alert .
2. Press to select an option:
Disabled—
• You are not alerted if you
roam outside your home service
area.
• When no service— You are alerted
with three tones, decreasing in
intensity, when service is lost.
User's Guide for the QCP 2035 Phone
When service is acquired again,
you will hear three tones in
increasing intensity.
3
• On roam change— You are alerted
with two tones, decreasing in
intensity, when roaming service is
—
acquired. When home area service
is acquired again, you will hear two
tones, increasing in intensity.
On any change—
• You are alerted with
three increasing tones if there is a
change in roaming service or three
decreasing tones if the phone loses
service.
Privacy Alert
3 3
1. Select Menu Settings
3
Privacy Alert .
2. Press to select an option:
• Disabled— Do not play any alerts.
Enabled—
• Play an audible alert
whenever enhanced privacy is lost
or regained and a call is in progress.
Note— An alert message always shows on
the screen, regardless of these settings.
3
Network
21