Chevrolet 2013 Malibu Owner's Manual page 293

Low-Beam Headlamp
1. For the driver side bulb, remove
the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
2. Remove the cap from the back
of the headlamp assembly by
turning it counterclockwise.
3. Disconnect the electrical
connector.
4. Remove the bulb from the
lamp assembly by turning
counterclockwise.
5. Install a new bulb in the lamp
assembly.
6. Connect the electrical connector.
7. Replace the cap from the back
of the headlamp assembly by
turning it clockwise.
8. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.
Front Turn Signal, Parking, and
Sidemarker Lamp
To replace one of these lamps:
1. For the driver side bulb, remove
the windshield washer bottle
filler neck by firmly pulling it
straight up and out of the bottle.
2. Remove the bulb socket from
the headlamp assembly by
turning it counterclockwise.
Vehicle Care
3. Remove the bulb from the
socket.
4. Replace the bulb in the bulb
socket.
5. Install the bulb socket in the
headlamp assembly by turning it
clockwise.
6. For the driver side, reinstall the
windshield washer bottle filler
neck by firmly pushing it straight
into the bottle. Ensure that the
filler neck clip engages into the
underhood electrical center
retainer.
10-27