Operation - Chevrolet 2013 Malibu Owner's Manual

Display Settings
Press the Config button on the
Home Page or the CONFIG button
on the faceplate, then select Display
Settings from the list.
The following options may display:
Dimming Mode: Press to
change the screen background.
The Automatic setting adjusts the
screen background automatically
depending on the exterior lighting
conditions.
To change the overall brightness
setting for the display, use the
vehicle interior lighting instrument
panel illumination control.

Operation

Controls (Radio with CD)
The infotainment system is
operated by using the pushbuttons,
multifunction knobs, menus shown
on the display, and steering wheel
controls, if equipped.
Turning the System On or Off
O
VOL/ (Volume/Power): Press to
turn the system on and off.
Automatic Switch-Off
If the infotainment system has
been turned on after the ignition
is turned off, the system will turn
off automatically after 10 minutes.
Volume Control
(Uplevel Radio)
O
VOL/ (Volume/Power): Turn to
adjust the volume.
/ (Phone): For vehicles with
OnStar, press and hold
mute the infotainment system. Press
and hold / again, or turn the
O
VOL/ knob to cancel mute.
For vehicles without OnStar®,
press / to mute the
infotainment system. Press
again, or turn the VOL/
cancel mute.
Infotainment System
Menu System
Controls
The TUNE/MENU knob and
the BACK
navigate the menu system.
TUNE/MENU: Press to:
Select or activate the highlighted
menu option.
Confirm a set value.
Turn a system setting on or off.
Turn to:
Enter the menu system.
Highlight a menu option.
/ to
Select a value.
BACK
Exit a menu.
Return from a submenu screen
to the previous menu screen.
/
Delete the last character in a
O
sequence.
knob to
7-11
button are used to
: Press to: