Remote Control Unit; Error Display Messages - Panasonic CQ-HX2083U Operating Instructions Manual

Troubleshooting
E
N
G
L
I
S

❐ Remote Control Unit

H
33
Trouble
Battery polarities are reversed.
➡Insert the battery correctly.
Wrong the battery.
➡Check the battery.
Buttons are invalid for
operation.
The battery has run down.
➡Replace the battery.
Remote control unit is in the wrong direction.
➡Direct the remote control at sensor on the front panel.

Error Display Messages

❐ CD/MP3/WMA
Display
≥ Disc is dirty, or is upside down.
≥ A disc that has data other than CD-DA or MP3/WMA type is
loaded.
➡
Check the disc.
Disc has scratches.
➡
Check the disc.
No operation by some cause.
➡If normal operation is not restored, call the store where you pur-
chased the unit or the nearest Servicenter to ask for repairs.
When there is no MP3/WMA files in the specified folder during direct
MP3/WMA folder selection.
➡Select another folder which contains MP3/WMA files.
The player cannot read the file you are trying to play for some rea-
son. (File recorded in an unsupported file system, compression
scheme, data format, file name extension, damaged data, etc.)
➡Select a file that the player can read. Confirm the type of data
recorded on the disc. Create a new disc if necessary.
An attempt has been made to play a copy-protected WMA file.
➡
60
CQ-HX2083U
(Continued)
Cause/Step
Cause/Step
Play WMA files which are not copy-protected.
❐ CD Changer
Display
≥ Disc is dirty, or is upside down.
≥ A disc other than a music CD (CD-DA type) is loaded.
➡Check the disc. (The changer automatically switches to the next
disc.)
Disc has scratches.
➡Check the disc. (The changer automatically switches to the next
disc.)
No operation by some cause.
➡If normal operation is not restored, call the store where you pur-
chased the unit or the nearest Servicenter to ask for repairs.
The display continues if you cannot switch off the power.
No disc is in the changer (magazine).
➡Insert discs into the changer (magazine).
The changer has become disconnected from the main unit in the
changer mode.
➡Verify that correct connections have been made.
Note:
≥ For details, refer to operating instructions for the changer used.
E
N
G
L
I
S
H
34
Cause/Step
61
CQ-HX2083U