SAGEMCOM F@ST 2804v2 Reference Manual
  1. Manuals
  2. Brands
  3. SAGEMCOM Manuals
  4. Network Router
  5. F@ST 2804v2
  6. Reference manual

SAGEMCOM F@ST 2804v2 Reference Manual

Sagemcom f@st 2804v2 router
Hide thumbs
Table of Contents

Advertisement

Quick Links

F@ST™ 2804v2
Reference Manual
Edition of may 2010
253 329 475-A

Advertisement

Table of Contents
loading

Related Manuals for SAGEMCOM F@ST 2804v2

Summary of Contents for SAGEMCOM F@ST 2804v2

  • Page 1 F@ST™ 2804v2 Reference Manual Edition of may 2010 253 329 475-A...

  • Page 3: Guide To Symbols Used In This Manual

    Sagemcom assiduously monitors technical developments and is constantly seeking to improve its products in order to let its clients take full advantage of them. It therefore reserves the right to modify its documentation accordingly without notice. All brands mentioned in this guide are registered by their respective owners: F@st™...

  • Page 4: How Should The Document Be Used

    Annex A Troubleshooting CE compliance declaration Annex B Environment Annex C Technical Characteristics Annex D Default configuration Annex E Annex F Glossary Annex G Connection technology F@st™ 2804v2 Reference Manual - 253329475-A Page 0-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 5: Table Of Contents

    3. Installing and configuring the F@st 2804v2 router 4. Configuration of network parameters 5. Information / Configuration 5.1 Accessing the welcome screen 5.2 Recommendations 5.3 ADSL connection status 5.4 Display frame F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 0-3...
  • Page 6 5-121 5.10.2.1 LAN 5-121 5.10.2.2 WAN 5-122 5.10.2.3 ATM 5-123 5.10.2.4 ADSL 5-124 5.10.3 Route 5-126 5.10.4 ARP 5-127 5.10.5 DHCP 5-128 5.10.6 Station Info 5-129 F@st™ 2804v2 Reference Manual - 253329475-A Page 0-4 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 7 Returning to the factory configuration Offline mode B. Annex B - Warnings for safety Warnings for safety B.1.1 Safety levels in relation to the case EC compliance declaration F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 0-5...
  • Page 8 G. Annex G - Connector Technology Pinouts of the " ADSL" connector Pinouts of the "PWR" connector Pinouts of the "ETH1", "ETH2", "ETH3" and "ETH4" connectors Pinouts of the "USB" connector F@st™ 2804v2 Reference Manual - 253329475-A Page 0-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 9: List Of Figures

    Figure 2.1 - Overview of case........................2-2 Figure 2.2 - Interconnection of ports of F@st 2804v2 ................2-5 Figure 2.3 - ADSL line / Power Supply Connection ................... 2-7 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 0-7...
  • Page 10 F@st™ 2804v2 Reference Manual - 253329475-A Page 0-8 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 11: Introduction

    1. Introduction This section covers presentation of the F@st™ 2804v2 range § 1.1 composition of the packaging § 1.2 required hardware and software § 1.3 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 1-1...

  • Page 12: Presentation

    It also lets you telephone over the Internet from an IP SIP telephone linked by Wi-Fi to your router. F@st™ 2804v2 products adapt the ADSL function for POTS (UIT G.992.1/3/5 - Annex A). Figure 1.1 - Supervising your router F@st™ 2804v2 Reference Manual - 253329475-A Page 1-2 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 13 Multi-VC ATM and ATM Quality of service (CBR, UBR, VBR), UpnP, TR069, QoS, Upgrade Firmware (Local and Remote), Backup/Restore and Upgrade configuration file (Local and Remote). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 1-3...

  • Page 14: Composition Of Router Pack

    1 Installation CD-ROM, 1 USB Wi-Fi key (optional), 1 USB Type A male/Type A female cable (length = 1.5 m) (optional), microfilter(s) (optional), 1 filter/splitter (optional). F@st™ 2804v2 Reference Manual - 253329475-A Page 1-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 15: Minimum) Prerequisites

    Standard pack (see annex G for use of Wi-Fi). Before installing the router, we advise you to uninstall any modem or other router (for example, an ADSL router). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 1-5...
  • Page 16 1 - Introduction F@st™ 2804v2 Reference Manual - 253329475-A Page 1-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 17: Description And Connection Of Your Router

    This section covers the description of your router § 2.1 connecting the ports of your router § 2.2 installing your router § 2.3 installation instructions § 2.4 F@st™ 2804v2 Reference Manual - 2533329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-1...

  • Page 18: Description

    The base has the LED ideograms, manufacturer's logo or the operator's logo. Below the base is a label on which the product's identification code, series number and barcode are shown. F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 19: Connectors

    On/Off switch. Miniature jack fixed connector. This connector enables the router to be supplied with direct current from a mains adapter unit. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-3...

  • Page 20: Leds

    No link detected on the Ethernet port Green steady Ethernet port has detected a link with a device Green blinking Tx/Rx traffic detected on the Ethernet port F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 21: Connecting The Ports Of Your Router

    2 - Description and connection of your router Connecting the ports of your router Figure 2.2 - Interconnection of ports of F@st 2804v2 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-5...

  • Page 22: Installing Your F@St

    Connect one end of the RJ11/RJ11 cable supplied with the equipment to the ADSL socket of your Residential Gateway. Connect the other end of this cable as shown in the Figure 2.3. F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 23: Figure 2.3 - Adsl Line / Power Supply Connection

    2 - Description and connection of your router Figure 2.3 - ADSL line / Power Supply Connection F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-7...

  • Page 24: Connecting To Your Computer

    Ethernet fixed connector (marked ETH1, ETH2, ETH3 ETH4 in the case of the F@st 2804v2) of your router, Connect the other end of the cable to your computer. F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-8 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 25: Connecting The Wi-Fi Interface Of Your Router To Your Computer

    This key should only be connected to your computer during installation of the Wi-Fi drivers (standard 802.11b/g/n)(see Quick Installation Guide). You can also use the wifi adapter incorporated in your computer. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-9...

  • Page 26: Connecting The Ethernet Interface Of Your Router To Your Tv Decoder

    ETH4) of your router. Connect the other end of the cable to a TV decoder. Note: For connection to the decoder, refer to the manufacturer's documentation. F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-10 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 27: Installation Instructions

    16 A protection against power surges, and with a differential protection. Maintenance It is prohibited to open the case. Only qualified personnel approved by your supplier may do Do not use liquid or spray cleaning agents. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 2-11...
  • Page 28 2 - Description and connection of your router F@st™ 2804v2 Reference Manual - 2533329475-A Page 2-12 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 29: Installing And Configuring The F@St

    3. Installing and configuring the F@st™ 2804v2 router F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 3-1...
  • Page 30 3 - Installing and configuring the F@st™ 2804v2 router For the installation of the F@st™ 2804v2, please refer to the Quick Installation Guide of this product F@st™ 2804v2 Reference Manual - 253329475-A Page 3-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 31: Configuration Of Network Parameters

    This section covers configuring as a DHCP client Page 4-3 reading status of the DHCP server Page 4-4 reading data of the DHCP client Page 4-5 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 4-1...
  • Page 32 It is imperative that your computer is configured as a DHCP client or that it has a fixed IP address in the configuration range defined by the DHCP server. Configuration as a DHCP client is the more commonly used solution. F@st™ 2804v2 Reference Manual - 253329475-A Page 4-2 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 33 "Obtain an IP address automatically" and the case "Obtain the addresses of the DNS servers automatically". • click the OK button to confirm your choice. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 4-3...
  • Page 34 This IP address must belong to the same sub-network as that of the local network. Leased Time (hour) Displays the period for obtaining (in hours) an IP address for a terminal. F@st™ 2804v2 Reference Manual - 253329475-A Page 4-4 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 35 Click the Start button, select Execute, enter cmd and then click OK; the command prompt screen appears. Enter ipconfig /all (or ipconfig/all) then confirm by pressing Enter. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 4-5...
  • Page 36 4 - Configuration of network parameters F@st™ 2804v2 Reference Manual - 253329475-A Page 4-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 37: Information / Configuration

    The "Wireless" section § 5.7 The "NAT" section § 5.8 The "Advanced Setup" section § 5.9 The "Advanced Status" section § 5.10 The "Management" section § 5.11 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-1...

  • Page 38: Accessing The Welcome Screen

    "Password" field. Then click on to confirm. Note: The equipment's IP address (192.168.1.1) appears in the bar at the top of the screen. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-2 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 39 These let you view and configure your router's parameters. You can modify the password to access your router's configurer to optimise the safety of your network. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-3...

  • Page 40: Recommendations

    3) All the fields in the different screens are explained in a table. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 41: Adsl Connection Status

    Displays the nominal down line transmission rate Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed Allows your router to be started F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-5...

  • Page 42: Status

    Default Gateway Default gateway address Primary DNS Server Primary DNS server address Secondary DNS Server Secondary DNS server address Date / Time Date and Time (see Note) F@st™ 2804v2 Reference Manual - 253329475-A Page 5-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 43: Diagnostics

    "Rerun Diagnostic Tests" at the bottom of the "Help" page, to check that the test has been conclusive. If the test still displays "FAIL", you must follow the troubleshooting procedure displayed on this page. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-7...
  • Page 44 5 - Information / Configuration • Select the Diagnostics menu in the Status section; the following screen opens: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-8 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 45: Internet Connection

    In the supervision box, indicator “Internet” passes from the green to the yellow and the text “Connected” is replaced by “Waiting for ISP”. • On the front panel, the indicator @ goes out. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-9...

  • Page 46: Wireless

    These menus must only be accessed/modified by experienced users. 5.7.1 Basic • Select the Basic menu in the Wireless section to display the following wireless network configuration screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-10 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 47: Wireless - Basic

    Conform to the CE Declaration of conformity / Radio rules list in appendix B to paragraph B.2. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-11...

  • Page 48: Quick Wireless - Security - Configuration

    The router may or may not be secured, at the request of the customer. This level of security is indicated on the label pasted to the box. This choice will modify the Wireless configuration screen. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-12 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 49 The characters are "0" to "9" and "A" to "F". Store the key phrase and the keys in a safe location. Do not write them in a file on your computer. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-13...
  • Page 50 "Guest SSID" fields appear. Check the appropriate box to activate the "Guest SSID". Box not Enable Guest SSID checked Guest SSID Enter a name for the "Guest SSID". Guest F@st™ 2804v2 Reference Manual - 253329475-A Page 5-14 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 51: Security

    The WPA encryption mode is the most robust and the best adapted to correctly securing your wireless network. • Select the Security menu in the Wireless section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-15...
  • Page 52 WEP Encryption Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-16 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 53: Network Authentication

    Object: The "Open System" authentication enables all users of the Wi-Fi network to authenticate themselves with the router. No restrictions concerning security are demanded. In this authentication mode, only the WEP key may be used to encrypt data. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-17...
  • Page 54 Empty See subsection 5.7.1.2 - WEP. Current Network Key See subsection 5.7.1.2 - WEP. Network Key x (1 to 4) See subsection 5.7.1.2 - WEP. Empty F@st™ 2804v2 Reference Manual - 253329475-A Page 5-18 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 55 See subsection 5.7.1.2 - WEP. Key Phrase Empty See subsection 5.7.1.2 - WEP. Current Network Key Select key 2 or 3 (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-19...
  • Page 56 Enter the encryption on the key you selected in the "Current Key" (see subsection 5.7.1.2- WEP). This field is empty or displays the key Non modifiable value entered earlier (greyed out) F@st™ 2804v2 Reference Manual - 253329475-A Page 5-20 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 57 WPA encryption Select the WPA encryption required from the TKIP scroll down list: • TKIP (Temporal Key Integration Protocol), • AES (Advanced Encryption Standard), • TKIP+ AES. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-21...
  • Page 58 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-22 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 59 (Renewing) broadcast multicast (LAN broadcast). WPA encryption Select the WPA encryption required from the TKIP scroll down list: • TKIP, • AES, • TKIP+ AES. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-23...
  • Page 60 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-24 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 61 This encryption mode applies the functionalities of the WPA2 protocol and requires the use of a "RADIUS" authentication server. • Select "WPA2" security from scroll down list; following screen appears: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-25...
  • Page 62 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-26 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 63 WPA key will be regenerated (Renewing) broadcast multicast (LAN broadcast). WPA encryption Select the WPA encryption required from the scroll down list: • TKIP, • AES, • TKIP+ AES. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-27...
  • Page 64 Select from the scroll down list: Disabled • Disabled to use WPA encryption only. • Enabled to use both WPA and WEP encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-28 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 65 RADIUS Port Enter the port used by the "RADIUS" 1812 authentication server. RADIUS Key Enter the secret key shared between the authentication server and its clients F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-29...
  • Page 66 WEP Encryption Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-30 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 67 63 ASCII characters or 64 hexadecimal symbols (256 bits). Click on the "Save/Apply" button to validate the entry. Note: You may display your secret phrase by clicking on "Click here to display". F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-31...
  • Page 68 WEP Encryption Select from the scroll down list: Disabled • Disabled to not use WEP encryption. • Enabled to use WE encryption (see subsection 5.7.1.2 - WEP). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-32 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 69: Mac Filter

    : Enables computers whose MAC address is in the list to use your wireless network, Denied : Refuses computers whose MAC address is in the list to use your wireless network. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-33...
  • Page 70 (MAC Restrict Mode) “Allow” to authorize only the computers whose MAC address appears in the list to be connected to your router. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-34 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 71: Advanced

    Object: This menu is used to configure the essential parameters of your wireless network (WLAN) 802.11 and configure certain security parameters. • Select the Advanced menu in the Wireless section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-35...
  • Page 72 It is recommended not to reduce the packet size too much to avoid reducing the bandwidth. Enter a threshold value (in bytes) between 256 and 2347. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-36 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 73 802.11 environments (g and b for example) or Off to improve the quality only on the 802.11g environments but degrade it on other environments (802.11b for example). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-37...
  • Page 74 (20%, 40 %, 60 %, 80 % or 100 %) at which you want to transmit. Note: The power rate will be selected according to your environment. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-38 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 75: Quality Of Service

    In the scroll down list, select Enabled or Disabled to permit or prohibit a more effective bit rate of the data flow with, on the other hand, a higher error rate. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-39...
  • Page 76 The following screen appears as soon as you activate "WMM". • Click on the Add QoS Entry button to add a Wi-Fi Quality of Service (wifi QoS) rule; the following screen appears. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-40 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 77 6 - WMM Voice priority These are higher priorities. They provide complete routing for voice 7 - WMM Voice priority Click on the button to save the parameters. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-41...

  • Page 78: Nat

    (WAN) to computers on the local network (LAN) via the Internal Ports. • Select the Port forwarding menu in the section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-42 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 79 This internal end port (LAN side) is associated with the external Internal Port End end port (WAN) side. Note: This cannot be modified. Server IP Address Computer address delivered by your router's DHCP server. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-43...
  • Page 80 5 - Information / Configuration • Click on the Add button; the following screen appears: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-44 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 81 You must always start entering with the "External Port Start" and "External Port End" ports, When you allocate a number to an "External Port Start", the same number is automatically allocated "Internal Port Start" identically "External Port End", F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-45...
  • Page 82 The "Delta Force 2" service is available on your computer via the external ports 3568 and 3569 (WAN side) and via the internal ports 3568 and 3569 (LAN side). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-46 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 83: Port Triggering

    Port Range A port range contains a Start port and an End port. Note: A single port is characterised by an identical start port and end port. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-47...
  • Page 84 Complete the ID Host of your computer's IP address (this is attributed by your router's DHCP server). • Fill in the "Trigger Port Start", "Trigger Port End", "Trigger Port Start", "Trigger Port End" and "Protocol" fields. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-48 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 85 Using the "Trigger" 3568 port (WAN side), the "Delta Force" service server triggers the opening of port range 3100 to 3999 for your computer to access this service. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-49...

  • Page 86: Dmz Host

    Note: Click on the Save/Apply button to take account of the address or its erasure. The "DMZ" zone is deactivated by default. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-50 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 87: Alg

    Field Meaning Default SIP Enabled Check the box to permit telephoning in VoIP via the Checked Wi-Fi or Ethernet interfaces using the SIP protocol. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-51...

  • Page 88: Advanced Setup

    Object: This menu is associated with the remote network. It is used to display the list of all the configured PVCs, to add PVCs or remove them. • Select the menu in the Advanced Setup section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-52 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 89 This function enables the distribution of Multicast datagrams over the local network (LAN) and interaction between the router and the local network hosts. • Click on the Add button to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-53...
  • Page 90 This field only appears when the "UBR with PCR", "CBR", "Non Realtime VBR" or "Realtime VBR" type of service is selected. This file only appears when the "Non Realtime VBR" or "Realtime VBR" type of service is selected. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-54 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 91 PPP over ATM (PPPoA) Field Action Default Encapsulation Mode Select the encapsulation of your choice from the VC/MUX scroll down list. • VC/MUX, • LLC/ENCAPSULATION. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-55...
  • Page 92 Select the encapsulation of your choice from the LLC/SNAP- scroll down list. BRIDGING • LLC/SNAP-BRIDGING, • VC/MUX. PPPoE/PPPoA The encapsulation mode field will be selected automatically with PPPoE/PPPoA protocol type. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-56 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 93 Enter a value (in minutes) between 1 and (minutes) [1-4320]: 4320 (i.e. 72 hours). This field only appears when the "Dial on demand (with idle timeout timer)" field is activated (box checked). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-57...
  • Page 94 Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. This field only appears when the "Use Static IP Address" field is activated (box checked). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-58 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 95 "Advanced Status" section shows the "State is disable" if “Enable WAN Service” has not been selected. • Click on the Next button to continue configuring the remote network (WAN) in PPPoA mode. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-59...
  • Page 96 Service State Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled F@st™ 2804v2 Reference Manual - 253329475-A Page 5-60 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 97 1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE session is interrupted. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-61...
  • Page 98 The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-62 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 99 Protocol_VPI_VCI_Index For example: pppoe_0_35_1. Note: You may enter another service name. Click on the Next button to continue configuring the remote network (WAN) in PPPoE mode. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-63...
  • Page 100 Service State Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled F@st™ 2804v2 Reference Manual - 253329475-A Page 5-64 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 101 This field only appears when the "Use the following IP address:" field is activated (box checked). This field only appears when the "Use the following default gateway:" field is activated (box checked). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-65...
  • Page 102 Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Use the following DNS server addresses:" field is activated (box checked). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-66 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 103 Displays the name of the service being mer_0_35_1 configured. This name, which is allocated automatically, is made up as follows: Protocol_VPI_VCI_Index For example: mer_0_35_1. Note: You may enter a different service name. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-67...
  • Page 104 Displays the status of the service: Enabled Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled F@st™ 2804v2 Reference Manual - 253329475-A Page 5-68 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 105 If you check this box, you must enter DNS server addresses: server addresses. Primary DNS server Enter a primary server DNS Address. Secondary DNS server Enter a secondary server DNS Address. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-69...
  • Page 106 For example: ipoa _0_35_1. Note: You may enter another service name. • Click on the Next button to continue configuring the remote network (WAN) in IPoA mode. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-70 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 107 Displays the status of the service: Enabled Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-71...
  • Page 108 This field only appears if the Enable IPTV box in the previous field is checked. Enter the IP address of the external network of the "Set Top Box" connected virtually to this "PVC". F@st™ 2804v2 Reference Manual - 253329475-A Page 5-72 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 109 Displays the status of the NAT: Disabled Firewall Displays the status of the firewall: Disabled IGMP Multicast In the "Bridge" connection, this field is: Not Applicable F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-73...
  • Page 110 1 and 4320 (minutes) [1-4320]: (i.e. 72 hours). If there is no traffic for a certain period of time, the PPPoE/PPPoA session is interrupted. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-74 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 111 The MTU specifies the maximum size of the data used (IP packets) expressed as a number of bytes. • Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-75...
  • Page 112 The “Enable WAN Service” function makes it possible to disable connection types in a list to use only the selected connection type. Click on the Next button to continue configuring the remote network (WAN) in PPPoE/PPPoA mode. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-76 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 113 Service State Displays the status of the NAT: Enabled Firewall Displays the status of the firewall: Enabled IGMP Multicast Displays the status of the IGMP function: Disabled F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-77...

  • Page 114: Lan

    Enable IGMP Snooping Box not Group Management Protocol) protocol. This checked lets you manage the declarations of belonging to one or more groups with Multicast routers. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-78 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 115 This field only appears when the "Enable DHCP" field is activated (box checked). This field only appears when the "Configure the second IP Address and Subnet Mask for LAN interface" field is activated (box checked). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-79...

  • Page 116: Advanced

    This computer can be part of a LAN (Local Area Network). IP Address Displays the IP Address delivered by your 192.168.1.1 router's DHCP server to your computer. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-80 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 117 To reserve the current address, check the "Select" box; both "MAC Address" and "IP Address" fields appear in the relevant fields of the "Reserved IP Addresses" area, then click on the button. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-81...
  • Page 118 Click in the box to delete MAC Address and IP Address of the table. All the reserved addresses belong to the range of addresses assigned by router's DHCP server (192.168.1.2 to 192.168.1.254). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-82 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 119: Security

    Source Address / Mask Source IP address / Subnet mask. Source Port Source port Dest. Address / Mask Destination IP address / Subnet mask. Dest. Port Destination port. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-83...
  • Page 120 Enter a "destination" port (WAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-84 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 121 By default, all the incoming data is refused when the Firewall is activated. • Select the Incoming sub-menu in the Security menu in the Advanced Setup section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-85...
  • Page 122 Enter a "destination" port (LAN) or range of ports. (port or port:port) Note: For one port, for example, enter 80. For a range of ports, enter 80:90. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-86 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 123: Block Sites

    Object: This menu is used to block the access of the Local Area Network to sites defined by a “keyword or a “Domain Name”. • Select the Block Sites sub-menu in the Security menu in the Advanced Setup section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-87...
  • Page 124 Blocked Sites Trusted IP Address Enter the IP address of the LAN computer to be authorized access to blocked sites. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-88 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 125: Quality Of Service

    The quality of service is only significant if all the traffic (data, video) is greater than the up rate of the ADSL line. • Select the Quality of Service menu in the Advanced Setup section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-89...
  • Page 126 CS6 (11000) : Routers mark Routing traffic to CS6, CS7 (111000) Note : This drop-down list is present only if the box “Enable Qos” is checked. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-90 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 127: Queue Config

    QoS Queue. Enable QoS enabled or disabled for this interface. Note: This status can be amended starting from this window. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-91...
  • Page 128 : High priority for this queue, : Medium priority for this queue, : Low priority for this queue. Note : A high priority leads to low packet loss. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-92 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 129: Qos Classification

    Subject: Classification of packets into traffic classes. Enforcement of policies using queing. • Select the QoS Classification sub-menu in the Quality of Service menu to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-93...
  • Page 130 802.1P Priority field 802.1P (value between 0 and 7). Order Sequence number. Enable/Disable QoS enabled or disabled for this traffic class. Note: This status can be amended starting from this window. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-94 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 131 5 - Information / Configuration • Click on the Add button to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-95...
  • Page 132 WAN from the scroll down list. Note: The "Enable 802.1q" box is only present in "Bridging" mode. This condition is transparent for the other modes. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-96 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 133 Select Blank or a priority value between 0 and 7 from the scroll down list. Note: 802.1p Priority cannot be selected together with IP traffic condition. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-97...

  • Page 134: Routing

    (pppoe_8_35_1 for not checked example). Interface used this field only appears when the "Enable Automatic Assigned Default Gateway" field is deactivated (box not checked). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-98 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 135: Static Route

    Field Meaning Destination Remote network IP address Subnet Mask Remote subnet mask Gateway Default gateway of the remote network Interface Remote network interface F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-99...
  • Page 136 IP address of the gateway. not checked Empty Use Interface Select the interface you want to use from Box checked the scroll down list (pppoa_8_35_1 for Interface example). used F@st™ 2804v2 Reference Manual - 253329475-A Page 5-100 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 137: Rip

    VPI/VCI associated with the interface. (LAN) Version Select the RIP version of your choice from the scroll down list. • for RIP1, • for RIP2, • Both. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-101...
  • Page 138 (silent mode). Enabled Check the box to activate the "RIP" function on Box not the interface you want (LAN or WAN for checked example). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-102 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 139: Dns

    Enter a primary DNS server address. Secondary DNS server Enter a secondary DNS server address. This field only appears when the "Enable Automatic Assigned DNS" field is deactivated (box not checked). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-103...

  • Page 140: Dynamic Dns

    On the screen above, The fields of the table are detailed in the next subsection (Add). The "Service" field is automatically filled by the system in "dyndns". F@st™ 2804v2 Reference Manual - 253329475-A Page 5-104 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 141 5 - Information / Configuration F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-105...
  • Page 142 User Name Enter the account name supplied to you by the dynamic DNS provider. Password Enter the account password provided to you by the dynamic DNS provider. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-106 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 143: Dsl

    ADSL2 Enabled Box checked AnnexL Enabled Box checked ADSL2+ Enabled Box checked AnnexM Enabled Box not checked Check the boxes according to the characteristics of your line. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-107...
  • Page 144 Click on the Advanced Settings button to display the following screen: Field Default Normal Selected box Reverb Box not selected Medley Box not selected No retrain Box not selected Box not selected F@st™ 2804v2 Reference Manual - 253329475-A Page 5-108 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 145 All the tones are selected by default. To select a tone, simply check the associated box. To not select a tone, simply leave its associated box empty. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-109...

  • Page 146: Port Mapping

    (ENET (1-4)) ports are gathered and seen like only one virtual port. When the box is checked, these ports are independently seen fall performances of the transfers between ports is noted. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-110 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 147 By default, all the interfaces are dedicated to data and are associated with the first VC (Virtual Channel) existing or created. • Click on the Add button to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-111...
  • Page 148 ATM "br_8_50" service ("Bridge" protocol) created earlier using the Advanced Setup / WAN) menu. then click on the button to transfer this interface to the "Grouped Interfaces" area. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-112 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 149 Default "Group Name" associates the "Data" service with the interfaces by default (Wireless, Wireless_Guest, ENET1, ENET2, ENET3). the dedicated ATM interface nas_8_50 and the Ethernet interface ENET4 are associated with the "Video" service. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-113...
  • Page 150 5 - Information / Configuration To enable you to understand better, the following diagram shows the path of the "Video" and "Data" flows. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-114 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 151: Certificate

    Summarises the main characteristics of the certificate. Type Indicates the status of the certificate (e.g.: request). Action Select the action from the list: view, load signed certificate, remove. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-115...
  • Page 152 Enter the name of the organisation which owns the certificate State/Province Name Enter the name of the state of province Country/Region Name Select the country from the scroll down list F@st™ 2804v2 Reference Manual - 253329475-A Page 5-116 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 153 Click on the Import Certificate button to display the following screen: Field Action Default Certificate Name Enter the name of the certificate Certificate Insert the certificate here Private key Insert the private key here F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-117...

  • Page 154: Trusted Ca

    TR-69 (in SSL mode), enable the mutual authentication of the CPE and the ACS. • Select the Trusted sub-menu in the Certificate menu in the Advanced Setup section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-118 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 155 Field Action Default Certificate Name Enter the name of the certificate to be imported. Certificate Insert the certificate here. Private Key Insert the private key here. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-119...

  • Page 156: Advanced Status

    Object: This menu is used to display all the parameters which concern the remote network. • Select the menu in the Advanced Status section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-120 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 157: Statistics

    Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-121...

  • Page 158: Wan

    Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-122 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 159: Atm

    Select the sub menu in the Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-123...

  • Page 160: Adsl

    Select the ADSL sub menu in the Statistics menu in the Advanced Status section to display the following screen: • click on the button to reset statistics. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-124 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 161 "Test Time (sec)" field, select the test time from the scroll down list. • Click on the button to run test. • Click on the button to shut window and return to the previous screen. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-125...

  • Page 162: Route

    Object: This menu is used to display all the information concerning your router's routing. • Select the Route menu in the Advanced Status section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-126 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 163: Arp

    Address Resolution Protocol). This lets you find out the physical address of a computer's network card, corresponding to an IP address. • Select the menu in the Advanced Status section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-127...

  • Page 164: Dhcp

    Object: This menu is used to display all the computers which obtained an IP address from the router's DHCP server. • Select the DHCP menu in the Advanced Status section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Page 5-128 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 165: Station Info

    Only appear the MAC addresses (BSSIDs) of the computers associated with the router and/or authorized by this one to use your wireless network (see subsection 5.7.3 - MAC Filter). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-129...

  • Page 166: Management

    5.11.1 Settings This menu contains the following three sub menus: • Backup (see subsection 5.11.1.1), • Update (see subsection 5.11.1.2), • Restore Default (see subsection 5.11.1.3). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-130 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 167: Backup

    It is recommended to save the current configuration on your computer to a file • Select the Backup sub menu in the Settings menu of the Management section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-131...
  • Page 168 Click on the Save button to save the current configuration file, for example, on your computer. • Select the directory where you want to save the "backupsettings.conf" configuration file. The process takes a few seconds. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-132 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 169: Update

    Select the configuration file then click on the Update Settings button to recover a configuration which has already been saved. The process takes around 2 minutes. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-133...

  • Page 170: Restore Default

    " " LED (PWR) then all the LEDs and the process for returning to the factory configuration starts. It lasts for around 2 minutes. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-134 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 171: System Log

    Object: This menu is used to view and/or configure the events which occur on your router. • Select the System Log menu in the Management section to display the following screen: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-135...

  • Page 172: View System Log

    (see table in the next paragraph - "Configure System Log"). • Click on the Save button to save all the events allocated to the severity you configured. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-136 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 173 5 - Information / Configuration Configure System Log • Click on the Configure System Log button to configure the events which occur on your router. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-137...
  • Page 174 "View System Log" button. The severities are classified in decreasing order of importance. • Emergency, • Alert, • Critical, • Error, • Notice, • Informational, • Debugging. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-138 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 175 Server UDP Port Enter the number of the port associated with the "Syslog" server. This field only appears when the mode selected is "Remote or "Both". F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-139...

  • Page 176: Snmp Agent

    The rights are Read / Write (RW). System Name Enter the name of the SNMP server. Sagem System Location Enter the place where is your SNMP server. unknown F@st™ 2804v2 Reference Manual - 253329475-A Page 5-140 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 177 Hereafter, an example of SNMP configuration: Field Action Read Community Iris (RO) Cyclamen (RW) Set Community System Name rose System Location France System Contact Myrouter@sagem/com Trap Manager IP 192.168.1.1 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-141...

  • Page 178: Client

    Enter the URL or the IP address of the "ACS" Empty server. ACS User Name Enter the name of the user of the "ACS" admin server. ACS Password Enter the "ACS" server password. admin F@st™ 2804v2 Reference Manual - 253329475-A Page 5-142 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 179 User Name Connection Request Enter your password for your router. admin Password • Click on the button to launch the auto-configuration procedure of your router. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-143...

  • Page 180: Internet Time

    These servers display the date and time GMT (Greenwich Mean Time). Note: For these events to be displayed and/or saved at an effective date and time, you should check this box. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-144 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 181 GMT time to that Date Line West of the country where you live with the seasonal correction (Summer time or Winter time). F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-145...

  • Page 182: Access Control

    (WAN). Note: The ICMP service is always activated on the local network (LAN) and may be activated or deactivated on the remote network (WAN). F@st™ 2804v2 Reference Manual - 253329475-A Page 5-146 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 183: Ip Address

    Field Action Default Access Control Mode Select Enable to activate the access control Box not mode or Disable to not activate it. checked F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-147...
  • Page 184 Click on the Add button to add an IP address. Note: From this address you may access the local management services when the access control is active. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-148 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 185: Passwords

    Enter your old password New Password Enter your new password Confirm Password Confirm your new password Note: The password is a string of a maximum of 16 alphanumerical characters. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-149...

  • Page 186: Update Software

    Throughout the download procedure (up to five minutes), you must: • not power down the router, • not disconnect from the ADSL line. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-150 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 187: System Info

    (sysinfo) with f24 type. • Select System Info menu in the Management section ; the following screen appears: F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-151...
  • Page 188 Note: This file can be opened with different apllications as spreadsheet program, word processing for example Microsoft Excel, Microsoft Word, Notepad and so on. F@st™ 2804v2 Reference Manual - 253329475-A Page 5-152 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 189: Save/Reboot

    Click on the Save/Reboot button to restart the router. The process takes around 1 minute. A countdown is displayed to tell the user how long is left to wait. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 5-153...
  • Page 190 5 - Information / Configuration F@st™ 2804v2 Reference Manual - 253329475-A Page 5-154 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 191: Internet Access Service

    6. Internet access service This section covers of the introduction P6-2 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 6-1...
  • Page 192 • the DNS addresses are correctly configured in each terminal. The router enables DNS queries to be relayed. F@st™ 2804v2 Reference Manual - 253329475-A Page 6-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 193: Tv Over Adsl Service

    7. TV over ADSL service This section covers the introduction § 7.1 access to the optional TV over ADSL service § 7.2 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 7-1...

  • Page 194: Introduction

    Note: In the example above, the ATM interface "ppp_8_35_1" is dedicated to data and the ATM interface "nas_8_50_1" is dedicated to video. configure "Port Mapping" in accordance with section 6.9.8. F@st™ 2804v2 Reference Manual - 253329475-A Page 7-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 195: Updating The Firmware

    8. Updating the firmware This section covers setting up the download. P8-2 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page 8-1...
  • Page 196 You can download the new firmware to update your router as indicated in subsection 5.5.7 of the HTTP configurator. TR69 protocol Operators can use "TR69" protocol to upgrade the router's firmware from an HTTP or FTP server. F@st™ 2804v2 Reference Manual - 253329475-A Page 8-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 197: A. Annex A - Troubleshooting

    "Diagnostics" tool § A.4 interpreting the lights § A.5 reinitialising your router § A.6 resetting with the factory configuration § A.7 no-connection mode § A.8 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page A-1...

  • Page 198: Annex A - Troubleshooting

    States of Front panel LEDs, Data accessible by the configurator by "DSL Router" onboard HTTP of your router: • supervision of the router, • "Diagnostics" tool. F@st™ 2804v2 Reference Manual - 253329475-A Page A-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 199: Front Panel Leds

    No link detected on the Ethernet port Green steady Ethernet port has detected a link with a device Green blinking Tx/Rx traffic detected on the Ethernet port F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page A-3...

  • Page 200: Supervising Your Router

    Displays the nominal down line transmission rate Displays the nominal up line transmission rate Buttons Allows data displayed on the screen to be refreshed. Allows your router to be started. F@st™ 2804v2 Reference Manual - 253329475-A Page A-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 201: Diagnostics" Tool

    A hypertext link (help) enables the user to access context-related help. This help gives an explanation concerning the state of the connection (PASS in green, DOWN in orange and FAIL in red) and supplies the appropriate troubleshooting procedures. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page A-5...
  • Page 202 IMPORTANT If you experience difficulties connecting to the Internet, we recommend that you restart your router (cf.A.6) or possibly re-establish the factory configuration (cf. § A.7). F@st™ 2804v2 Reference Manual - 253329475-A Page A-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 203: Interpreting The Leds

    Check that the delivered power cord is properly connected at one end to the mains power network. Check that the power connector is inserted correctly in the corresponding connector (power) of the router. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page A-7...

  • Page 204: Restarting Your Router

    CD-ROM, or to enter again the ADSL connection data supplied by your Internet Service Provider (ISP) (see Internet Connection section - § 5.6). F@st™ 2804v2 Reference Manual - 253329475-A Page A-8 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 205: Offline Mode

    In the menu bar, select the "File" menu then deselect the "Work Offline" command. Click OK in the browser's "Address" field to display the home screen. When the router is installed, this box is checked. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page A-9...
  • Page 206 Annex A - Troubleshooting F@st™ 2804v2 Reference Manual - 253329475-A Page A-10 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 207: Annex B - Warnings For Safety

    B. Annex B - Warnings for safety This section covers Warnings for safety § B.1 the EC compliance declaration § B.2 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page B-1...

  • Page 208: Warnings For Safety

    This equipment can be operated in the EU without restrictions indoor, but cannot be operated outdoors in France in the whole of the band until further notice. Sagemcom Broadband SAS declares that the F@st™ 2804v2 product conforms to the requirements of European directives 1999/5/CE and the essential requirements of directives 2004/108/CE and 2006/95/CE.

  • Page 209: Annex C - Environment

    C. Annex C - Environment This section covers directive E 2002/96/CE § C.1 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page C-1...

  • Page 210: Directive E 2002/96/Ce

    Preservation of the environment as part of a sustainable development logic is an essential concern of Sagemcom. Sagemcom‘ aim is to operate systems safeguarding the environment and consequently it has decided to integrate environmental performance considerations in the life cycle of its products, from manufacturing to commissioning, use and disposal.

  • Page 211: D. Annex D - Technical Characteristics

    This section covers mechanics and displays § D.1 the characteristics of the different interfaces § D.2 environmental characteristics § D.3 the application and the protocols § D.4 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page D-1...

  • Page 212: Annex D - Technical Characteristics

    Abbreviation Meaning • Green Power LED • ADSL Green ADSL LED • WLAN Green WLAN LED • Internet Green/Red Internet LED • Ethernet Green Ethernet LED F@st™ 2804v2 Reference Manual - 253329475-A Page D-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 213: Characteristics Of The Different Interfaces

    Standard USB 2.0 • Data Asynchronous • Transmission Mode bidirectional • Power Supply 5 V - 500 mA maximum • Connection technology USB - Type A F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page D-3...
  • Page 214 • Filtering by list of MAC addresses • WPA (encryption mode: TKIP or AES) • Range 200 m in free space • 30 m inside buildings F@st™ 2804v2 Reference Manual - 253329475-A Page D-4 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 215 DC Power Supply Input of router • Input Voltage 11 V - 13 V • Power absorbed < 7 W • Connection technology Miniature jack fixed connector diam. 3.5 mm F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page D-5...

  • Page 216: Environmental Characteristics

    Flicker and fluctuations of EN 61000-3-3 voltage • Immunity EN 55024 Radio part for ISM band at 2.4 GHz • Transmission 802.11g/b ETR 300 328-2 Ed. Juillet 2000 F@st™ 2804v2 Reference Manual - 253329475-A Page D-6 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 217: Application And Protocols

    PPP over ATM RFC 2364 • PPP over ETH over ATM RFC 2516, RFC 1483/2684 • IP over ATM RFC 1483/2684 • ETH over ATM RFC 1483/2684 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page D-7...
  • Page 218 • Management From ETH, USB and WAN (with specific option) • Downloading of version Client by http mode • Telnet • TR69 Via a ACS server F@st™ 2804v2 Reference Manual - 253329475-A Page D-8 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 219: Annex E - Default Configuration

    § E.1 the default configuration for the local network (LAN) § E.2 the default configuration for the local wireless network § E.3 (WLAN) F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page E-1...

  • Page 220: Default Username And Password

    IP address ( IP address 192.168.1.1:631 Access to a LAN printer BROADCAST, ARP, MULTICAST Activated Router The LAN traffic is routed to your ISP NAT/PAT Activated F@st™ 2804v2 Reference Manual - 253329475-A Page E-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 221: Default Configuration For The Local Wireless Network (Wlan

    The following table supplies the principal default WLAN parameters of your F@st™ 2804v2. Wireless Characteristics (Wi-Fi) Value IP address 192.168.1.1/24 Enable Wireless Box checked SSID Sagem2804 Auto Channel Network Autentication F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page E-3...
  • Page 222 Annexe E - Configuration par défaut F@st™ 2804v2 Reference Manual - 253329475-A Page E-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 223: Annex F - Glossary

    F. Annex F - Glossary F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page F-1...
  • Page 224 Integrated Service Digital Network Internet Service Provider L2TP Layer 2 Tunneling Protocol Local Area Network Link Control Protocol Logical Link Control Medium Access Control Media Dependent Interface F@st™ 2804v2 Reference Manual - 253329475-A Page F-2 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 225 Trivial File Transfer Protocol Unspecified Bit Rate User Datagram Protocol UPnP Universal Plug and Plug Uniformed Resource Locator Unshielded Twisted Pair VBR-nrt Variable Bit Rate - non real time F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page F-3...
  • Page 226 Wide Area Network Meshed network of information servers Wired Equivalent Privacy Weighted Fair Queuing Wi-Fi Wireless Fidelity (réseau sans fil) WLAN Wireless Local Area Network Wireless Protected Access F@st™ 2804v2 Reference Manual - 253329475-A Page F-4 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 227: Annex G - Connector Technology

    § G.1 pinouts of the "PWR" connector § G.2 pinouts of the "ETH1", "ETH2", "ETH3" and "ETH4" § G.3 connectors pinouts of the "USB" connector § G.4 F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page G-1...

  • Page 228: Pinouts Of The " Adsl" Connector

    The mains unit is connected to the equipment using the miniature fixed connector of the case. Contact No Signal Meaning Intérieur +12 V Connexion DC "+" Extérieur Masse Connexion DC "-" F@st™ 2804v2 Reference Manual - 253329475-A Page G-2 Sagemcom document. Reproduction and disclosure prohibited...

  • Page 229: Pinouts Of The "Eth1", "Eth2", "Eth3" And "Eth4" Connectors

    (-) Reception of terminal Not connected Not connected The Ethernet port is self-detecting. You can use either straight or crossed cables. An emission or reception signal is detected automatically. F@st™ 2804v2 Reference Manual - 253329475-A Sagemcom document. Reproduction and disclosure prohibited Page G-3...

  • Page 230: Pinouts Of The "Usb" Connector

    The "USB" interface is connected to the equipment using type A female USB fixed connector. Contact No Signal Meaning PC power (+) - Data Subscriber line signal + Data Subscriber line signal Ground Earth F@st™ 2804v2 Reference Manual - 253329475-A Page G-4 Sagemcom document. Reproduction and disclosure prohibited...
  • Page 232 Sagemcom Broadband Headquarters: 250, route de l'Empereur 92848 Rueil-Malmaison cedex - FRANCE Tel: +33 (0)1 57 61 10 00 - Fax: +33 (0)1 57 61 10 01 www.sagemcom.com...

Table of Contents