Connecting With A Component Cable - LG 32LE75 Owner's Manual

EXTERNAL EQUIPMENT SETUP
■ To avoid damaging any equipment, never plug in any power cord until you have finished connecting
all equipment.
■ Image shown may differ from your TV.

CONNECTING WITH A COMPONENT CABLE

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do
receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as
shown below.
Connect the video outputs ( Y, P
1
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
Connect the audio output of the external equip-
2
ment (digital set-top box, DVD, etc.) to the
COMPONENT IN AUDIO jacks on the TV.
Turn on the external equipment.
3
( Refer to the external equipment's manual for
operating instructions.)
Select the Component1/2 input source using the
4
INPUT button on the remote control.
If connected to COMPONENT IN 3, select
Component3 input source.
► HDMI Audio Supported format : Dolby Digital, PCM
DTS Audio format is not supported.
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
2
) of the
, P
B R
Component
O
O
O
O
(24Hz/30Hz/50Hz/60Hz)
(50/60Hz only)
Y P
B
Y P
B
Y B-Y
Y Cb
Y Pb
LAN
1
HDMI/DVI IN
3
2
1
WIRELESS
CONTROL
HDMI
*COMPONENT IN3 jack is just composed by an
X
integrated video jack and an integrated audio
O
jack. And the integrated audio jack also can be
used as the AV IN2 jack.
O
Once you connected the integrated audio jack,
the AV2 connection remind OSD will display,
O
if you just need it as the component Audio jack,
please choose No.
P
R
P
R
R-Y
Cr
P
2 1
2
AV IN 2 AV IN 2
ANT
I