Toshiba VP 300 Installation Instructions Manual page 385

Action
12. @DISKO
Enter
13. Choose option 3 —
REPLACE A DISK.
14. Enter the number of
the drive slot to be
replaced.
15. Remove Software
Diskette #1 from the
floppy drive.
Reload the System
16. Make sure the
configuration backup
diskette is write-enabled.
17. Insert the configuration
backup diskette into
the FD.
18. Press the lower button
on the CPU.
VP 300 Description and Response
The following menu is presented:
CURRENT STATUS
Slot Type ID Status
- - - - - - - - - - - - - - - - - - - - - - - - - - - - -
B4 System1 S1 ACTIVE
B3 System2 – – UNKNOWN
C1 Voice1 – – EMPTY
C2 Voice2 – – EMPTY
C3 Voice3 – – EMPTY
C4 Voice4 – – EMPTY
DISK OPTIONS
1. ADD DISK
2. REMOVE DISK
3. REPLACE A DISK
4. RESTORE SYSTEM
5. UPGRADE LANGUAGES
Select option to be performed
(1–5, – Empty line = EXIT)
:
The following is presented:
:3
Select drive slot to be replaced: (Empty line = EXIT)
:
The VP 300 displays the following screen. (There may be a delay
before the screen appears.)
:B4
Selected drive has been replaced.
To reload the system.
PROCEDURES
Configured
Configured
Configured
Not Configured
Not Configured
Not Configured
Not Configured
Toshiba VP Systems Release 7.1 July, 1994
6-71